Upgraded to a 100psi pump from your web site. What are your recomendations on nozzle size with the 100psi pump. Let's say for 400-450rwhp and 4800cc of fuel and boost at 1.3-1.5bar.

thanks

chuck

 

Just back from some circut racing, First nozzle is a 3gpm rated at 40psi and comes on at .3bar. Second nozzle is a 6gpm rated at 40psi and comes on at 1bar. This was not to much water. I used 1gal of water in under 15 minutes of racing. May try larger nzzles.

chuck

 

<div class='quotetop'>QUOTE(sleeper7 @ Apr 17 2005, 05:59 PM)</div><div class='quotemain'>Upgraded to a 100psi pump from your web site. What are your recomendations on nozzle size with the 100psi pump. Let's say for 400-450rwhp and 4800cc of fuel and boost at 1.3-1.5bar.

thanks

chuck


</div>





Chuck, for 450 rwhp, we recommend 4.9 to 6.0 gallons per hour. When you get beyond 4.9 gph you need to either run a Tee to a second injector or think about a dual stage set up.



Thanks!