tranny question

Reply Subscribe

Thread Tools

Search this Thread

Sep 19, 2008 | 02:43 PM

sen2two

Thread Starter

Senior Member

Joined: Feb 2005

Posts: 1,579

From: Kissimmee FL.

how do i get the shifter housing off of the shaft? and the NA to TII are no different correct?

i unbolted the four bolts and couldnt get it to come off...

Sep 19, 2008 | 06:41 PM

j9fd3s

Senior Member

Joined: May 2002

Posts: 22,465

From: California

the tailshaft housing needs to come off.

Sep 20, 2008 | 10:19 AM

sen2two

Thread Starter

Senior Member

Joined: Feb 2005

Posts: 1,579

From: Kissimmee FL.

the entire end piece? why is that?

Sep 20, 2008 | 09:14 PM

j9fd3s

Senior Member

Joined: May 2002

Posts: 22,465

From: California

maybe you dont have to, but that shift rod is in the way, and i dont know if it moves enough

Sep 21, 2008 | 12:54 AM

sen2two

Thread Starter

Senior Member

Joined: Feb 2005

Posts: 1,579

From: Kissimmee FL.

would this be in any of the manuals? i thought i would just unbolt the 4 bolts and pull it off the little shaft... i dont know what could be holding on that shaft.

Sep 21, 2008 | 11:10 AM

j9fd3s

Senior Member

Joined: May 2002

Posts: 22,465

From: California

if it is in the manual it didnt rate a picture, i think. there are a bunch of roll pins holding it all together

Sep 21, 2008 | 04:09 PM

sen2two

Thread Starter

Senior Member

Joined: Feb 2005

Posts: 1,579

From: Kissimmee FL.

Quote:

Originally Posted by j9fd3s' post='908297' date='Sep 21 2008, 09:10 AM

if it is in the manual it didnt rate a picture, i think. there are a bunch of roll pins holding it all together

in the tail housing, or in the shifter housing?

im going to either take the entire tail housing off, or break down the shifter housing. dont wanna do both when only one is needed...hopefully

Sep 21, 2008 | 08:27 PM

fc3s4utnv

Senior Member

Joined: Jan 2005

Posts: 831

From: Greenwood AR

take the side cover off of the shifter housing and I want to say there are four roll pins that you can push out and the shifter assembly will slide off of the rod.....