tranny question

Reply Subscribe

Thread Tools

Search this Thread

09-19-2008, 02:43 PM

sen2two

Senior Member

Thread Starter

Join Date: Feb 2005

Location: Kissimmee FL.

Posts: 1,579

how do i get the shifter housing off of the shaft? and the NA to TII are no different correct?

i unbolted the four bolts and couldnt get it to come off...

09-19-2008, 06:41 PM

j9fd3s

Senior Member

Join Date: May 2002

Location: California

Posts: 22,465

the tailshaft housing needs to come off.

09-20-2008, 10:19 AM

sen2two

Senior Member

Thread Starter

Join Date: Feb 2005

Location: Kissimmee FL.

Posts: 1,579

the entire end piece? why is that?

09-20-2008, 09:14 PM

j9fd3s

Senior Member

Join Date: May 2002

Location: California

Posts: 22,465

maybe you dont have to, but that shift rod is in the way, and i dont know if it moves enough

09-21-2008, 12:54 AM

sen2two

Senior Member

Thread Starter

Join Date: Feb 2005

Location: Kissimmee FL.

Posts: 1,579

would this be in any of the manuals? i thought i would just unbolt the 4 bolts and pull it off the little shaft... i dont know what could be holding on that shaft.

09-21-2008, 11:10 AM

j9fd3s

Senior Member

Join Date: May 2002

Location: California

Posts: 22,465

if it is in the manual it didnt rate a picture, i think. there are a bunch of roll pins holding it all together

09-21-2008, 04:09 PM

sen2two

Senior Member

Thread Starter

Join Date: Feb 2005

Location: Kissimmee FL.

Posts: 1,579

Quote:

Originally Posted by j9fd3s' post='908297' date='Sep 21 2008, 09:10 AM

if it is in the manual it didnt rate a picture, i think. there are a bunch of roll pins holding it all together

in the tail housing, or in the shifter housing?

im going to either take the entire tail housing off, or break down the shifter housing. dont wanna do both when only one is needed...hopefully

09-21-2008, 08:27 PM

fc3s4utnv

Senior Member

Join Date: Jan 2005

Location: Greenwood AR

Posts: 831

take the side cover off of the shifter housing and I want to say there are four roll pins that you can push out and the shifter assembly will slide off of the rod.....