2nd Generation Specific 1986-1992 Discussion

Help!

Old Aug 24, 2003 | 06:20 PM
  #1  
rotart rebel's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2003
Posts: 1
Unhappy

im in the middle of putting a new clutch in and when i got it off my flywheel was ragged. so i took off the nut on the end of the eccentric shaft and started to get the flywheel off. it moved prolly bout an eigth of an inch and now it wont move any more. i bought a gear puller hooked it up and that wont move it. im stuck carless with my baby outside in the drive way in pieces. im getting very discouraged and i would appreciate all the help i can get.
Old Aug 24, 2003 | 06:27 PM
  #2  
FrestyleFC3S's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,259
From: Schofield Barracks, HI
Default

take a breath, have a beer, and go read up on the FSM



sorry i couldnt help out more...i never did a clutch job yet in a rotary...ull have a lot of answers in a few minutes
Old Aug 24, 2003 | 09:02 PM
  #3  
Scott 89t2's Avatar
Senior Member
 
Joined: Mar 2002
Posts: 288
Default

how did you get the flywheel off? that is always the hardest part. it's on there with 350lbs + of torque.





anyways. I would maybe just bang away at it with a hammer
Old Aug 24, 2003 | 09:13 PM
  #4  
isamu's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 1,847
From: Marysville WA.
Default

You can try prying on it with a crow bar too, but don't overdo it. Just firmly pry around it from different angles.
Old Aug 24, 2003 | 09:37 PM
  #5  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

Originally Posted by isamu' date='Aug 24 2003, 09:13 PM
You can try prying on it with a crow bar too, but don't overdo it. Just firmly pry around it from different angles.
yea it takes a while...
Old Aug 24, 2003 | 11:18 PM
  #6  
rotary rebel's Avatar
Member
 
Joined: Aug 2003
Posts: 92
From: va
Default

i got the nut off with an impact wrench but the engine is still in the car so i cant get at the fw at many angels. the eccentric shaft wont turn any more and thats scarry. im hopeing i didnt screw anything up. ive broken a hammer handle on it. the gear puller wont work. i dunno. and yeh freestyle many beers have been consumed while i sat next to the car and pondered how to get it off. thats about the best suggestion ive had so far.heh. i think i might have leaned it uneven one way or another so since its not flush with the shaft it wont come off easily. im bout to get it towed and done professionaly. this is my first rotary and really the first time ive done serious car work. but i appreciate all the help i can get. thank all that have replyed and all that will.



for 5637 miles and then on a rotary lover.

chris
Old Aug 25, 2003 | 02:20 AM
  #7  
FrestyleFC3S's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,259
From: Schofield Barracks, HI
Default

hmmmm....pour a beer ion the flywheel, in the oil filler, and in the gas tank



itll lube **** up real good





have you tried to "push" it back in to normal, and then try again? also, are you working on this alone? get a friend who knows what hes doing with cars to come help out, more people = more options, opinions, hands, and helps keep you sane ---- plus if u need to go out and get something you can use his car
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fcrotornut
2nd Generation Specific
27
Apr 18, 2007 04:31 PM
up&coming
2nd Generation Specific
7
Oct 7, 2003 09:17 PM
mockujin
2nd Generation Specific
1
Jun 15, 2003 11:53 PM
racerxtreme7
Interior, Exterior, Audio Mods
11
Feb 8, 2003 10:17 AM
leoiu69
2nd Generation Specific
4
Mar 24, 2002 08:27 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:18 AM.