*** Hybrid Help ***
#1
i just got my hybrid in and looking over it there a few this wrong .. on the Compressor Housing there isn't a nipple to connect the waistgate so i guess im asking the guys who had this problem if you could tell me where i could run the line that runs from the waistgate.. another thing is the stock waistgate doesn't match the bolt pattern on the Compressor Housing is there another internal waistgate that i could go with that would bolt onto this to4b hybrid?
#3
[quote name='RussellTT94' date='Apr 1 2005, 06:06 PM']on the intercooler piping coming right off the compressor, just weld a nipple on to it
[/quote]
thats what i did, i just tapped the aluminum pipe that the bov goes to
[snapback]694190[/snapback]
[/quote]
thats what i did, i just tapped the aluminum pipe that the bov goes to
#4
[quote name='j9fd3s' date='Apr 2 2005, 02:14 PM']thats what i did, i just tapped the aluminum pipe that the bov goes to
[/quote]
k ill hit the hardware store tomorrow and see if i can find one there to tap in..
[snapback]694471[/snapback]
[/quote]
k ill hit the hardware store tomorrow and see if i can find one there to tap in..
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)