i just got my hybrid in and looking over it there a few this wrong https://www.nopistons.com/forums/pub...IR#>/blush.png .. on the Compressor Housing there isn't a nipple to connect the waistgate so i guess im asking the guys who had this problem if you could tell me where i could run the line that runs from the waistgate.. another thing is the stock waistgate doesn't match the bolt pattern on the Compressor Housing is there another internal waistgate that i could go with that would bolt onto this to4b hybrid?
https://i15.ebayimg.com/02/i/03/c2/d1/58_1_b.JPG |
on the intercooler piping coming right off the compressor, just weld a nipple on to it
|
[quote name='RussellTT94' date='Apr 1 2005, 06:06 PM']on the intercooler piping coming right off the compressor, just weld a nipple on to it
[snapback]694190[/snapback] [/quote] thats what i did, i just tapped the aluminum pipe that the bov goes to |
[quote name='j9fd3s' date='Apr 2 2005, 02:14 PM']thats what i did, i just tapped the aluminum pipe that the bov goes to
[snapback]694471[/snapback] [/quote] k ill hit the hardware store tomorrow and see if i can find one there to tap in.. |
All times are GMT -5. The time now is 03:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands