Originally Posted by Rutt' date='Nov 18 2002, 11:37 AM
|
|
Stuff I have:
93 rx7 touring Apexi GT Spec Exhaust Pettit resonated Midpipe Apexi RX6 Turbo Kit @ 15psi Greddy Pully Kit Fluidyne Radiator Magnacor Wires NGK Platinum 9 spark plugs Blitz Blow Off Valve Apexi Wastegate Ported By XS Engineering Apexi Power FC DIY Wideband O2 Sensor Greddy Boost Gauge Greddy Water Temp Gauge Greddy Exhaust Temp Gauge NipponDenso Fuel Pump 550cc Primary Injectors 1300cc Secondary Injectors Modified Secondary Fuel Rail Apexi GT Spec Intercooler Heat Wrapped Exhaust Manifold and DownPipe Ceramic Coated Downpipe Ceramic Coated Intercooler Pipes Greddy Autometer Turbo Timer Datalogic...soon Boost Controller...soon Tein HA/ Pillowball Mounts i got more stuff but i cant remember because i am tired Items i Want: Feed Dual Oil Coolers Feed Bored Throttle Body Cusco Twin Plate Clutchor OS giken Twin Plate 9.5 lb Flywheel Cusco Diff HKS Twin Power Ignition....hopefully soon Not Performance But I Still Want it: 99 RZ seats M2 Toe Links M2 Trailing Arms Strut Bars SwayBars Bushings C's Short Throw Shifter/ or Mazdaspeed Ings Body Kit Se37A 18/8.5 18/10 more stuff but i am tired now |
Impressive mods....but where are your dyno numbers. It looks like a bunch of Christmas wish lists to me.
Come on "SHOW ME THE NUMBERS!!!!!" :yum: Especially if you are set up with a GT35/40! |
nice jspec. :bigthumg: is that the new motor?
|
Ken, 58 years young
'94 white, pep, red leather, mods: Hayes/KDR street port & polished, 3mm Hurley racing seals, upgraded coolant seals, Power FC ecu, Commander, Datalogit, XS T04e single turbo kit, GReddy SMIC (400+cu.in.), Aquamist 2s water injection kit, Pettit ss resonated MP, Pettit ss cat-back, RP Racing fuel pump, 1600cc injectors, Profec B(15&21psi), 3-Bar Map Sensor, Centerforce clutch, Racelogic Traction Control, Under pulley kit (no air pump), Pettit short shifter kit, LaBreck's bushings, Evans Coolant https://www.nopistons.com/luv94rx7.html http://flathat.woodstream.net/LUV94RX7/ |
I figured this would be a good virgin post here.. :smirk:
93 touring/SSM/black/manual stock port motor HKS TO4E kit(HKS cast manifold, HKS racing WG, Garrett TO4E divided housing/.84AR hot/.60 cold 57trim) Blitz fmic Tial BOV 550/1300 injectors Denso pump SX regulator SS lines/AN fittings Apex'i Power FC/Commander SS resonated midpipe Blitz Nur-spec exhaust Defi gauges Fluidyne radiator w/home depot custom shield-ducting Greddy pulley kit Greddy elbow CWR dual oil cooler kit (going in soon) Almost finished installing the kit, so no clutch or boost controller yet. 99% sure that an ACT unit with a lighter flywheel will be going in, along with a Profec A. I want the Profec A for two reasons, it uses a stepping motor not a solenoid, and I can hide it in the door cubby and just control it with a steering wheel mounted button once it is tuned. Open to input on that opinion though https://www.nopistons.com/forums/pub...#>/biggrin.png . Matt |
Here is my setup for this month:
BNR Race Ported Motor TII 8.5:1 compression rotors w/ 3mm seals Greddy T78 Greddy SUS Manifold HKS SSQ BOV 550/1600 injectors FD3S Secondary Fuel Rail Nippondenso Competiton FP SX FPR 3" Midpipe Blitz NUR Spec CB Power FC w/ Commander Greddy Profec B HKS Twin Power Ignition (coming soon) Spec 4 puck clutch RB Lightweight Steel flywheel Greddy Pulley Kit Blitz FMIC Fluidyne Radiator GM 3bar MAP sensor (coming soon) Then I still have to finish up the rear end of the car such as PPF, Axles, Diff, Toe Links, and Trailing Arms. No more Power Steering or AC and I want my ABS out as well. Someday. |
Ken, 58 years young
'94 white, pep, red leather, mods: Hayes/KDR street port & polished, 3mm Hurley racing seals, upgraded coolant seals, Power FC ecu, Commander, Datalogit, XS T04e single turbo kit, GReddy SMIC (400+cu.in.), Aquamist 2s water injection kit, Pettit ss resonated MP, Pettit ss cat-back, RP Racing fuel pump, 1600cc injectors, Profec B(15&22psi), 3-Bar Map Sensor, Centerforce clutch, Racelogic Traction Control, Under pulley kit (no air pump), Pettit short shifter kit, LaBreck's bushings, Evans Coolant https://www.nopistons.com/luv94rx7.html http://flathat.woodstream.net/LUV94RX7/ |
mjw heard nothing good about the profec a. i have the blitz sbc id works great. i've seen the profec b in action that works pretty good too!
|
All times are GMT -5. The time now is 04:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands