Have you seen that thread mr.port & polish started? I cant even imagine what he was thinking. You dont make a claim like that and not back it up. First off you should not make that claim UNTIL you actually do it. I guess that is my main point. It is just gay that all those tools are falling like a cheap ***** for that thread. I wish the 8 club had mods with balls to lock it or kill it.



Just spouting over my morning coffee https://www.nopistons.com/forums/pub...1047683785.gif

LInk?

I was not trying to cross link but here ya go http://www.rx8club.com/showthread.php?t=43848

https://www.nopistons.com/forums/pub...1047683785.gif

We need a "Tool" emoticon dont ya think

bwaaaaaaahhahahahaha



250shot ???

Jon you laughing at your boy Ito?

I thought he left that board and asked for all his threads to be locked or deleated?

I was going to say that....Isn't Mr. port an polish judge ito?





Please don't start like that retarded forum....

umm i don't know if that is/was him?

I think it is ito but never confirmed. Anyhow it is funny as hell.



"I need NOS 2 bottles" Dogg

Listen buddy, Mr P&P is me over at the 8 site. I am not obligated my any means to post my results. I made 242rwhp without nitrous, more then any Rx8 owner has made. My car is sporting a ported engine and 1 nozzle nitrous kit as we speak. I have not had the time to go and dyno for the new results. I am currently in the middle of negotiations with my shop and building. The sale should go through and I'm out. Rest assure after I sell the building , I will have time to myself and play around some more with my Rx8.



I warn you. After I dyno my Rx8 and make my 350rwhp with nitrous and ported engine, Don't come sucking my dick, and asking me how I did it and how I controlled ignition timing to avoid detonation. because I am well aware that you specifically are starving for Rx8 horsepower.

Trust me this is not rocket science. Porting is not freaking voo doo maqic. I will be fine making my own power. Your ego is pretty large and I call BULLSHIT. https://www.nopistons.com/forums/pub...R#>/violin.gif



Get over it

man....chill out...or go stay on the other fruity forum...

Black8, I need to chill out. Mr gay & homo told me to suck him off. I think I have a reason to fire back. If YOU DONT LIKE then you dont have to READ IT.................. https://www.nopistons.com/forums/pub...O_DIR#>/11.gif

well.....yes...both need to chill out. C'mon....let's be cool here.....

I believe he just posted NOT to come suck his dick.... https://www.nopistons.com/forums/pub..._DIR#>/dry.png



What is the point of this thread? And why isn't it locked yet?https://www.nopistons.com/forums/pub...1047683561.gif

This doesn't sound like the nice, polite, humble Ito that I have read posts from in the past? No offence but anyone with enough money to buy any one of the new turbo kits that are recently becoming available and some basic mechanical and EFI knowledge can make good horsepower with a Renesis. Not knocking what you claim to be doing with your RX8 if it's working for you but why knock someone for being a little critical of your claims? We are still a forum open to debate are we not? So lets not get off on the wrong foot. One cannot expect to make a claim like the one Mr. Port and Polish did and not expect a critic or two to make some comments. I think there are more intelligent replies other than "don't suck my dick" I am still not completely sure what Rikki is fusing over. Is it that there has been no dyno sheet to back his claim? If that is the challange then I think the gauntlet has been thrown and lets see if Ito can rebute.



We are all reading and waiting..

Because we are not a forum of commies.

Hey, you're right there, in fact, here is one of the definitions of what this forum is

You are correct I was attacked by mr. Ito. I could care less what he calls me nor will I respond with childish comments. Until he proves me wrong. I am sticking to my guns.



Laterz





p.s. nice pix of the is300 have not seen that in a while. https://www.nopistons.com/forums/pub...1047683473.gif https://www.nopistons.com/forums/pub...#>/BURNOUT.gif crash. whoops I guess I am the only one that has wrecked a car. oh well I am over it. https://www.nopistons.com/forums/pub...IR#>/bigok.gif https://www.nopistons.com/forums/pub...1047683358.gif

that's funny....that pic is just one of thousands of random pics that are glitching their way onto people posts.





it's explained here



https://www.nopistons.com/forums/ind...howtopic=43900



I doubt he was personally attacking you....it is funny as hell that you actaully have a connection to that pic.



Anyways....chill....and pass the dutchie...hahahah

that pic was of a car you wrecked? if that was your car how was it and how did it hold up in the wreck? im looking at is300s and need opinions/reviews

Easy on the attitude there buddy. I'm not sure who you are, but I think Ito has proven himself more than once to be good to his word, and has done many things with rotaries that your common forum troll will not understand. But that's probably why he does it (or did it) for a living.



If you don't believe what he says, that's your opinion. But don't start harassing / degrading threads here, and not expect some retaliation.



Since we are all having opinions about this, mine is... I don't think rikki has a clue about what he's talking about.



additionally, if you don't think 108 whp can be made by adding nitrous your out of your mind. Nitrous is the same as any other forced induction, more oxygen + more fuel = more power. I don't think it will even take a 250 shot to get there. But hey, no one else has done it before so I guess it's impossible right? https://www.nopistons.com/forums/pub...1047683664.gif

ok. i don't care who attacks who just stop



rikki knows a thing or two, probably more than most about rotaries.... hell anytime i do anything with any of my cars people call BS. that is fine. PEOPLE ARE ALLOWED TO.



are we clear. if not pm me before i pm you https://www.nopistons.com/forums/pub...IR#>/smile.png

I am with Vosko on this. I think we should see how it turns out. I could care less if Mr.P&P makes 500 hp on nos and little puppy dog tails. Good for him BUT HE IS NOT THE ONLY PERSON TO MAKE POWER. Everyone thinks these motors need this and that but it is not that hard. Anyone I mean anyone can do it. https://www.nopistons.com/forums/pub...IR#>/boink.gif



-Rikki

You guys with NOS are all on your own. It is chessy horsepower and it is all YOU! https://www.nopistons.com/forums/pub...IR#>/bigok.gif



-Rikki

I don't understand your point to begin with in regards to this thread.

First and foremost, get a life. If your waiting every single day and every single minute of your life for the results of my Rx8, I feel sorry for you. I have no deadline to show results. I did not post a date and time. I will do it at my convenience. You call me out with bullshit and expect for me to be humble? **** you. I'm no rookie and I have done wonders with nitrous, what have you done? All I have seen you do, is run your mouth.. Calling me names ha? no respect. For who I am and what I have contributed. Glad to see how you really feel. This way I know who i'm dealing with. I love to see when people expose them self..



You say ego? what ego, Listen I'm walking away from this rotary world I live in.. One more thing.. I posted.. ported renesis plus nitrous will land me 350rwhp. That is a humble hp number. I have dynoed up to 450 rwhp on a ported + nitrous engine. I Know the limits a rotary engine could take, when it comes down to nitrous. The renesis engine will consume more then a 150hp nitrous shot. I am only using a 150 because I like the reliability it offers to the engine.



If you dont agree me thats fine. Thats your opinion. but don't come to this forum and call me on bullshit.

When someone has no respect and flat out says your full of ****, is hard to be humble. Especially when I have the fastest quarter mile time to date. The most amount of hp with out turbo.. I understand if I was a rookie and made my claim. But I'm far from a rookie for this wanna be Ryan, to call me out on bullshit..

Who really cares if I'm not the only person.. I know I don't. My mission is to show potential. Period...

Fair enough. I am human and can understand the emotions involved.



What 1/4 time are we talking about here? Time slip or link?

Judge Ito or Mr. Port & Polish:



I am only stating what you have posted on the other forum.



1.) You start a thread claiming that you are going make 350hp.

2.) You said you would post results as soon as you got them.

3.) Before those posts you posted about making 242 w/out a ported motor and it turned out you did port it and or used NOS.

4.) Now you dont have to share results of your power gains.

5.) I just think you get off on tickling the rx-8 guys balls with your outrageous claims.

6.) You claim to contribute to the forum and that is nice for you to do that but dont hold it over everyones head or expect everyone to owe you.

7.) I am old school I say put up or shut up. Dont state that you are going to do something and then say you dont have to post the info. Why all the hype?

8.) Bottom line is I am calling you out on this because it has gone on too long with nothing at all. Dont make a post like this and not respond for 2 months. Just dont post until you are ready like everyone else.





-Rikki https://www.nopistons.com/forums/pub...IR#>/bigok.gif





Dont get so upset. I am not trying to be a dick. I like my balls to get tickled but only by a women. Not the forum https://www.nopistons.com/forums/pub...R#>/tongue.png

I have to agree more with Rikki on this one. I certainly have noticed a not so subtle amount of ball tickling both here and at rx8club. Perhaps that was never Ito's intention to come across as an egotistical ball tickler, but nevertheless, it has happened in my eyes.



- an innocent and amused bystander

Your thread is degrading to a forum member in its intent.

this thread is retarded, we all know that ito doesnt know crap!







so i guess the random pics are back on

I think you are too defensive. You are reading into way to much.

If that's your way of joking around then you need sensativity training.

I don't understand your point. Again I do not owe anybody or anyone nothing. PERIOD......



When I made my power.. I said for legal reasons I am not at liberty to say, how I achived my power..



Sit back relax, and when I post my results, I post my results.. until then, sit and wait.. or do your own research and make your own power..

https://www.nopistons.com/forums/pub...1047683621.gif



Sorry to get off topic but that image attached to your last post Ito is classic. I wonder what the story there was. https://www.nopistons.com/forums/pub...#>/biggrin.png



I am glad to see this thread come back to civilization. Thank you all.

That's KAHREN's car in the ditch from the Rotorfest event in 2004











Ito ran a rotary building business and Rikki has an RX8?



Ito also has posted time and time again invaluable information in the rotary build forum





Ito knows what he is talking about, hands down

hahah, those are all my pics, what the hell is goign on https://www.nopistons.com/forums/pub...IR#>/smile.png