qwck10th

My motor is still out, so I think I'll pull the front cover

and remove the gear. Seems the oil feed needs some

restriction - either a plug, or the shaft. I'll probably leave

the shaft in, its easier.



Thanks for all the feedback - I just love details! :bigthumg:



Steve C.

- next week, the engine bay gets a make-over.

banzaitoyota

I drilled my front cover with a 17/64" bit. inserted a 1/4" rod with "sleeve lock on it. and hammered in for a interference fit. Pics tonight

banzaitoyota

Here is the interference fit method:

pengaru

I prefer the tap and plug method on the front housing



seems like a pointless junction to keep oil flowing through, especially if you're going to block the passage completely in the front cover, that pressure might start working it's way through the RTV / gasket between the front cover and front housing.

qwck10th

hmmm. thanks for the pics banzai...



I need to look into this some more.

banzaitoyota

I have one on the Flange side too, just being ****!



The Truth is I was too ******* lazy to go get the replacement for the broken/missing drill bit