Northwest Anything that pertains to Northwest owners.

need carb

Old Apr 17, 2007 | 02:13 PM
  #1  
unleashed's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2007
Posts: 129
From: wa
Default

i need a carb dont have a lot of cash any help on this will not go unseen please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Old Apr 17, 2007 | 06:42 PM
  #2  
spokanerxdude's Avatar
Senior Member
 
Joined: Jan 2006
Posts: 367
From: Spokane, WA
Default

Originally Posted by unleashed' post='868558' date='Apr 17 2007, 11:13 AM
i need a carb dont have a lot of cash any help on this will not go unseen please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
If you can get a carb overhaul kit there are several of us that can help you overhaul the carb. I recomend the one you can get from Black Dragon Auto, the link to there site is on the front page of our website. www.inwr.org . Hope this helps or is at least a good start.
Old Apr 17, 2007 | 07:07 PM
  #3  
CODE BLUE 2's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 597
From: Guess its Spokeompton... USA...
Default

Doesnt brian have a small shitload of carbs?
Old Apr 17, 2007 | 07:36 PM
  #4  
bstrange99's Avatar
Senior Member
 
Joined: Jul 2004
Posts: 376
From: Spokane
Default

Originally Posted by CODE BLUE 2' post='868598' date='Apr 17 2007, 05:07 PM

Doesnt brian have a small shitload of carbs?
That depends on what you consider "small".
Old Apr 17, 2007 | 08:46 PM
  #5  
unleashed's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2007
Posts: 129
From: wa
Default

ok ill try and see if we can rebuild it.it runs like a raped ape until i get in the secondarys then it starts to miss if this would be the correct actoin to take let me know please
Old Apr 21, 2007 | 07:07 AM
  #6  
spokanerxdude's Avatar
Senior Member
 
Joined: Jan 2006
Posts: 367
From: Spokane, WA
Default

Just a guess on my part but are your secondaries opening? The secondaries are vacuum so it take the right amount of air going through the carb to get them to open. You should be able to tell if the secondaries are open by taking the top off of the air cleaner and holding the throttle open all the way when the car is running, once the rpm's get high enough the secondaries should open.
Originally Posted by unleashed' post='868618' date='Apr 17 2007, 05:46 PM
ok ill try and see if we can rebuild it.it runs like a raped ape until i get in the secondarys then it starts to miss if this would be the correct actoin to take let me know please
Old Apr 21, 2007 | 06:01 PM
  #7  
unleashed's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2007
Posts: 129
From: wa
Default

no there not is there a way to make them im pullin a lot of vac ill hook the vac gage up and see if ive got poper vac do you know what its suposed to be or will idle vac have anything to with it
Old Apr 22, 2007 | 12:03 PM
  #8  
unleashed's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2007
Posts: 129
From: wa
Default

its pullin about 12 pounds of vac
Old Apr 24, 2007 | 08:40 AM
  #9  
spokanerxdude's Avatar
Senior Member
 
Joined: Jan 2006
Posts: 367
From: Spokane, WA
Default

Pull off the seconday diaphram and check to make sure it works, you should be able to feel air coming out when you move the diaphram. The passage in the carb can be blown through to try and clear it, if your using an air compressor don't seal the nozzle against the passage you could harm something but you can get close to it so it dosen't get the full force of the airstream.



Originally Posted by unleashed' post='869154' date='Apr 22 2007, 09:03 AM
its pullin about 12 pounds of vac
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
THansenite
1st Generation Specific
3
Feb 2, 2006 05:45 PM
Option6
1st Generation Specific
0
Mar 22, 2004 11:51 AM
Gen2RXSeven
Rotary Engine Building, Porting & Swaps
2
Dec 31, 2003 03:43 PM
firstgenjohn
Insert BS here
1
Dec 6, 2001 12:30 PM
falcoln
1st Generation Specific
2
Oct 12, 2001 10:49 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:59 PM.