NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   Northwest (https://www.nopistons.com/northwest-28/)
-   -   need carb (https://www.nopistons.com/northwest-28/need-carb-65360/)

unleashed 04-17-2007 02:13 PM

i need a carb dont have a lot of cash any help on this will not go unseen please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

spokanerxdude 04-17-2007 06:42 PM


Originally Posted by unleashed' post='868558' date='Apr 17 2007, 11:13 AM
i need a carb dont have a lot of cash any help on this will not go unseen please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If you can get a carb overhaul kit there are several of us that can help you overhaul the carb. I recomend the one you can get from Black Dragon Auto, the link to there site is on the front page of our website. www.inwr.org . Hope this helps or is at least a good start.

CODE BLUE 2 04-17-2007 07:07 PM

Doesnt brian have a small shitload of carbs?

bstrange99 04-17-2007 07:36 PM


Originally Posted by CODE BLUE 2' post='868598' date='Apr 17 2007, 05:07 PM

Doesnt brian have a small shitload of carbs?

That depends on what you consider "small".

unleashed 04-17-2007 08:46 PM

ok ill try and see if we can rebuild it.it runs like a raped ape until i get in the secondarys then it starts to miss if this would be the correct actoin to take let me know please

spokanerxdude 04-21-2007 07:07 AM

Just a guess on my part but are your secondaries opening? The secondaries are vacuum so it take the right amount of air going through the carb to get them to open. You should be able to tell if the secondaries are open by taking the top off of the air cleaner and holding the throttle open all the way when the car is running, once the rpm's get high enough the secondaries should open.

Originally Posted by unleashed' post='868618' date='Apr 17 2007, 05:46 PM
ok ill try and see if we can rebuild it.it runs like a raped ape until i get in the secondarys then it starts to miss if this would be the correct actoin to take let me know please


unleashed 04-21-2007 06:01 PM

no there not is there a way to make them im pullin a lot of vac ill hook the vac gage up and see if ive got poper vac do you know what its suposed to be or will idle vac have anything to with it

unleashed 04-22-2007 12:03 PM

its pullin about 12 pounds of vac

spokanerxdude 04-24-2007 08:40 AM

Pull off the seconday diaphram and check to make sure it works, you should be able to feel air coming out when you move the diaphram. The passage in the carb can be blown through to try and clear it, if your using an air compressor don't seal the nozzle against the passage you could harm something but you can get close to it so it dosen't get the full force of the airstream.




Originally Posted by unleashed' post='869154' date='Apr 22 2007, 09:03 AM
its pullin about 12 pounds of vac



All times are GMT -5. The time now is 09:44 PM.


© 2024 MH Sub I, LLC dba Internet Brands