twinturborx7pete

Its flaking, want to repaint it black again...



anyone have a procedure as well as needed materials.. would be great..thanks!

FikseRxSeven

get a carbon fiber kit and never see it again



or a brushed aluminum kit

Fd3BOOST

Get some sandable primer and coat the part with ablut 2-3 coats.

Lightly sand it smooth with 400 grit wet/dry paper.

Repeat till smooth. Use your favorite color spray and recoat with about 3-4 coats.

Best to let dry apx. 40 min between coats.

HotPilot

you might try some plasti-kote from advance.. I have used this on the center consloe of my fb... it was black to start with and now it is 414 red plasti-kote... matches my carpet very well.. I do suggest light coats after scubbing very thoughly.. and cleaning with acohol.. or thinnner.. some fish eyes do happen.. at least they did do me.. but the light coats make a big difference



Chris

HotPilot

I would post a pic or 2 but I do not know how I guess I am dumb

Srce

Iluvmyrx7 How To



I hope that helps? Keep us updated.

twinturborx7pete

i think those carbon fiber layover pieces look cheap.. least in pictures.. i've yet to see one in person. The car is white and just want to keep a black dash. Not into painting it all sorts of different colors. However i ran into that site where the guy will overlay carbon fiber to the dash peices, but i have no clue as to what the actual work looks like in person.



Is it a waste of time to repaint, or should i just buy an overlay. You guys let me know what kits you think are best for this, and if any of you have it on your car, if you could please post a picture that would be great too!

Fd3BOOST

A local guy Mark Koch does carbon fiber fd stuff.

His parts are the best bar none.





www.carbonfiberparts.net

Trust me if you like carbon fiber its worth a look.

twinturborx7pete

ya i've looked before, its just he's backed up til april!