Tranny for cosmo swap
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 1,081
From: Reno,NV
Ok I've been working on a 13b-re swap for a few years now. Finally I'm at the point of pre-fit and fabing anything that I might need..Now my friend and I go to test mount the tranny and engine..and to our suprise its an inch to short!!. I'm using an 86 auto body with an 87 T2 tranny..as we tried to test fit it we see that the tranny mounts are going to be at least an inch off...I was to understand that auto to 5 sp in an fc was bolt up so WTF am I missing something here? HELP PLEASE I want to get this freaking cosmo fc done!!!
Senior Member
Joined: Jul 2003
Posts: 119
From: New Hampshire
Originally Posted by Midnightdriver' post='829538' date='Jul 21 2006, 05:44 PM
Ok I've been working on a 13b-re swap for a few years now. Finally I'm at the point of pre-fit and fabing anything that I might need..Now my friend and I go to test mount the tranny and engine..and to our suprise its an inch to short!!. I'm using an 86 auto body with an 87 T2 tranny..as we tried to test fit it we see that the tranny mounts are going to be at least an inch off...I was to understand that auto to 5 sp in an fc was bolt up so WTF am I missing something here? HELP PLEASE I want to get this freaking cosmo fc done!!!
?? what series tranny? who made's the mount's?
Senior Member
Joined: May 2002
Posts: 22,465
From: California
Originally Posted by turborotor' post='829911' date='Jul 24 2006, 03:43 PM
The 86 - 88 chassis are different between auto and manual where the tranny hooks up.
All the verts I believe have both auto and manual tranny chassis mounts and I think the s5 too.
C
S5 is different, like the s4's
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
