Engine Swaps All about engine changeovers,swaps and related issues.

Swap 87NA to 88gxl

Thread Tools
 
Search this Thread
 
Old Nov 16, 2002 | 04:16 PM
  #1  
ghebert's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2001
Posts: 7
Default

Hi all, need some tech advice. I have a wrecked 87 NA 5 speed with 7000 miles on my rebuild engine. I want to swap it into a 88 N/A GXL automatic. Is this possible and how much extra work will it take? Gary
Old Nov 16, 2002 | 06:51 PM
  #2  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

yes its possible, will be very east too!( compared to most things) it will bolt right up, all u will need in a n/a manual ECU, im pretty sure the 7s with autos the ecu controlled it. U will also need your manual driveshaft to complete it.
Old Nov 17, 2002 | 03:17 AM
  #3  
Racer X's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

Don't forget to take the flex plate and counter wieght off your old engine too.Sometimes the little things you forget.
Old Nov 17, 2002 | 06:19 PM
  #4  
ghebert's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2001
Posts: 7
Default

Hey Racer, why do I need the flex plate and counter weight off the old engine? I'm swapping the engine and changing from auto to manual? Completely different tranny drive shaft and eng. Am I missing something? Fill me in if I sound confused. I'm not being a smarty pants I just never done this so I want to make sure. Thanks. Gary
Old Nov 17, 2002 | 06:32 PM
  #5  
ghebert's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2001
Posts: 7
Default

I already have the 87 NA in my garage waiting to find another car to put the engine in. I crashed while driving to work and ruined my baby. My engine only had 5000 miles on her. I spend allot time and money putting a rebuild in her and almost all new engine parts. Struts, exhaust, tires. To much not to try to find her a new body.
Old Nov 17, 2002 | 06:44 PM
  #6  
ghebert's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2001
Posts: 7
Default

Hey guy's, one more question on the auto to manual swap. Do these cars come with the proper mounting wholes or set up for both auto and manual at the shift section? I will have all the molding and hardware from my 87 5 speed. Is this all I need? Thanks again. Gary
Old Nov 17, 2002 | 10:08 PM
  #7  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

gary i think so, but like i said im not %100 positive.
Old Nov 17, 2002 | 10:13 PM
  #8  
turborotor's Avatar
Senior Member
 
Joined: Nov 2001
Posts: 1,622
From: LA, USA
Default

FOr some reason, The auto chassis are different from the manual chassis for the trans mount wholes.



C
Old Nov 17, 2002 | 10:22 PM
  #9  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

Originally Posted by turborotor' date='Nov 17 2002, 11:13 PM
FOr some reason, The auto chassis are different from the manual chassis for the trans mount wholes.



C
so what would u do then? i know ppl have done it...
Old Nov 29, 2002 | 12:50 PM
  #10  
samps's Avatar
Junior Member
 
Joined: Nov 2002
Posts: 26
Default

you will need to fab up a new mount. Once you get to that point it will be preaty obvious what needs to be done. The counter weight and flywheel will not need to be changed if you're taking an entire drivetrain out of one car to another. The driveshaft will though and the starter. You will run into the biggest problem with the pedals. They are a sum-bitchh to get out of one car and into another. All in all you can do this with the help of one strong freind and a little help from the web. There is also two wires you need to cut in the cruise control computer that will allow it to work with the manual, although I forget which two wires. The tach in the auto will also have a lower redline indicated, but don't let that fool you.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sen2two
2nd Generation Specific
2
Dec 28, 2006 10:57 PM
jdm12a
2nd Generation Specific
8
May 5, 2006 12:55 PM
saltersracing
RX-7 & RX-8 Parts For Sale & Wanted
1
Jul 21, 2005 10:27 PM
rx7kid2gtt
2nd Generation Specific
7
Feb 29, 2004 11:47 PM
OKIERX-7
Insert BS here
7
Mar 15, 2002 08:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:39 AM.