First Baseline Dyno Run
#1
ran my car this morning at a local speed shop. they do a montly special 3 pulls for $35! nice had some issue getting the a/f to read correct so I am not sure how accurate it was. did not work at all, they messed with it. still was funky, then it blew it out on the last run when they thought it was good to go...
anyways. i was somewhat bummed about the #'s 297 rwhp 237 rwtq this was running off the wastegate spring at 8psi. still decent for the low psi.
mods that matter, ported motor, hks t45s single turbo, haltech and other supporting stuff.
I was wondering on the low torque #'s is this normal or is it because the low boost? my plugs are a bit old ngk iridium 10 heat range.but should be ok. stock igniton otherwise, 15 degree advance, 12 trailing split. egts were around 1400 F intake temps were 107 f I know the turbo is prob not efficent till around 16psi.
thanks,
James
anyways. i was somewhat bummed about the #'s 297 rwhp 237 rwtq this was running off the wastegate spring at 8psi. still decent for the low psi.
mods that matter, ported motor, hks t45s single turbo, haltech and other supporting stuff.
I was wondering on the low torque #'s is this normal or is it because the low boost? my plugs are a bit old ngk iridium 10 heat range.but should be ok. stock igniton otherwise, 15 degree advance, 12 trailing split. egts were around 1400 F intake temps were 107 f I know the turbo is prob not efficent till around 16psi.
thanks,
James
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)