NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   Drag Racing Time Slips (https://www.nopistons.com/drag-racing-time-slips-42/)
-   -   First Baseline Dyno Run (https://www.nopistons.com/drag-racing-time-slips-42/first-baseline-dyno-run-25584/)

mako 09-27-2003 01:51 PM

ran my car this morning at a local speed shop. they do a montly special 3 pulls for $35! nice had some issue getting the a/f to read correct so I am not sure how accurate it was. did not work at all, they messed with it. still was funky, then it blew it out on the last run when they thought it was good to go...



anyways. i was somewhat bummed about the #'s 297 rwhp 237 rwtq this was running off the wastegate spring at 8psi. still decent for the low psi.



mods that matter, ported motor, hks t45s single turbo, haltech and other supporting stuff.



I was wondering on the low torque #'s is this normal or is it because the low boost? my plugs are a bit old ngk iridium 10 heat range.but should be ok. stock igniton otherwise, 15 degree advance, 12 trailing split. egts were around 1400 F intake temps were 107 f I know the turbo is prob not efficent till around 16psi.



http://206.54.188.4/dyno.jpg





thanks,

James

MazdaMike 09-28-2003 09:46 AM

runnin a little ruch but i guess thats cuz of the low boost



still good numbers, great for only 8psi. what boost are u planning on running

vosko 09-29-2003 06:57 PM

for 8psi that is about right

crank it up to 15psi and she will probably do 420rwhp


All times are GMT -5. The time now is 12:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands