Vac Hose Job
#1
I can't figure out how in the world to detach the AVC, the ignition coil rack and ultimately the solenoid rack.. I'm am looking through the service manual however i can't seem to find any directions on how to do it.. could anyone give me some directions or point me in a direction to go searching? thank you
#2
the ignition coils are mounted to the soilniod rack with 4 10mm nuts, also there is a ground wire attached to the coil assembly with a 8mm nut. the solinoid rack is mounted to the engine with 4 or 6 10mm bolts, they are hiding under all that mess of hoses
#6
I did the vac hose job about 2 months back. Took me a couple of weeks to do at a slow pace. You have to be VERY patient and careful. Don't do this job unless you have no set deadline and can work slowly and carefully or you'll go nuts.
I used the hose techniques kit. Worked fine for me.
I used the hose techniques kit. Worked fine for me.