3rd Generation Specific Talk about 3rd gen RX-7's here.

ticking...

Thread Tools
 
Search this Thread
 
Old Aug 11, 2006 | 04:21 PM
  #1  
amp's Avatar
amp
Thread Starter
Super Moderator
 
Joined: Jan 2002
Posts: 3,928
From: New Jersey
Default

traced the ticking to his primary injectors.. used a metalbar and the ticking was prominent once placed on top of the inj cover..

what would cause this... ill be swapping out his primaries with new ones... hes also been havin rough idle and bucking at low rpms...
Old Aug 11, 2006 | 04:40 PM
  #2  
1988RedT2's Avatar
Super Moderator
 
Joined: Apr 2002
Posts: 2,535
From: VA
Default

I swear the injectors on my '89 626 2.2 ticked every day for 14 years without incident.
Old Aug 12, 2006 | 01:04 AM
  #3  
tampaFD's Avatar
Senior Member
 
Joined: Sep 2003
Posts: 276
Default

all injectors tick. it is the sound of the pintle coming off the seat
Old Aug 12, 2006 | 10:49 AM
  #4  
GreyGT-C's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 2,436
From: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Default

bad lifter Jio, have the valves adjusted and it should fix it.



















i've never heard my injectors clicking (exhaust is way too loud) HOWEVER, could it be an exhaust leak (sounds close to the same) up on the turbo mani?
Old Aug 13, 2006 | 08:02 AM
  #5  
amp's Avatar
amp
Thread Starter
Super Moderator
 
Joined: Jan 2002
Posts: 3,928
From: New Jersey
Default

Originally Posted by tampaFD' post='832500' date='Aug 12 2006, 02:04 AM

all injectors tick. it is the sound of the pintle coming off the seat
yeah but this is fairly loud.. can be heard outside the car..

the metalbar trick was just to isolate the source...
Old Aug 13, 2006 | 08:05 AM
  #6  
amp's Avatar
amp
Thread Starter
Super Moderator
 
Joined: Jan 2002
Posts: 3,928
From: New Jersey
Default

Originally Posted by GreyGT-C' post='832519' date='Aug 12 2006, 11:49 AM

..could it be an exhaust leak (sounds close to the same) up on the turbo mani?
we thought so but was only able to isolate the noise to the primary injetor housing...

we decided to eliminate the lifters too... who needs those things.
Old Aug 14, 2006 | 02:33 AM
  #7  
JimmyJimboJet's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 1,113
From: Wi nøt trei a høliday in Sweden this yër?
Default

I remember distinct ticking after I blew my motor. might even still have a vid of it somewhere...



or course I had a paint-shaker idle also...
Old Aug 14, 2006 | 07:45 AM
  #8  
amp's Avatar
amp
Thread Starter
Super Moderator
 
Joined: Jan 2002
Posts: 3,928
From: New Jersey
Default

Originally Posted by JimmyJimboJet' post='832742' date='Aug 14 2006, 03:33 AM

..or course I had a paint-shaker idle also...
thats what it sounds like.. empty spray can shaken
Old Aug 22, 2006 | 06:24 AM
  #9  
rfreeman27's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 4,107
From: fredneck MD
Default

compression check.



Thats where I start for pretty much every problem haha...



The metalbar could be picking up the tick from the actual block, considering the primary injectors are bolted right into it...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tancred
2nd Generation Specific
8
Mar 8, 2006 11:10 AM
Dumbrotorkid
3rd Generation Specific
4
Jun 13, 2004 02:43 PM
papasmurf
3rd Generation Specific
3
Mar 27, 2003 10:59 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:35 PM.