NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   ticking... (https://www.nopistons.com/3rd-generation-specific-18/ticking-61057/)

amp 08-11-2006 04:21 PM

traced the ticking to his primary injectors.. used a metalbar and the ticking was prominent once placed on top of the inj cover..

what would cause this... ill be swapping out his primaries with new ones... hes also been havin rough idle and bucking at low rpms...

1988RedT2 08-11-2006 04:40 PM

I swear the injectors on my '89 626 2.2 ticked every day for 14 years without incident.

tampaFD 08-12-2006 01:04 AM

all injectors tick. it is the sound of the pintle coming off the seat

GreyGT-C 08-12-2006 10:49 AM

bad lifter Jio, have the valves adjusted and it should fix it.



















i've never heard my injectors clicking (exhaust is way too loud) HOWEVER, could it be an exhaust leak (sounds close to the same) up on the turbo mani?

amp 08-13-2006 08:02 AM


Originally Posted by tampaFD' post='832500' date='Aug 12 2006, 02:04 AM

all injectors tick. it is the sound of the pintle coming off the seat

yeah but this is fairly loud.. can be heard outside the car..

the metalbar trick was just to isolate the source...

amp 08-13-2006 08:05 AM


Originally Posted by GreyGT-C' post='832519' date='Aug 12 2006, 11:49 AM

..could it be an exhaust leak (sounds close to the same) up on the turbo mani?

we thought so but was only able to isolate the noise to the primary injetor housing...

we decided to eliminate the lifters too... who needs those things. https://www.nopistons.com/forums/pub...DIR#>/wink.png

JimmyJimboJet 08-14-2006 02:33 AM

I remember distinct ticking after I blew my motor. might even still have a vid of it somewhere...



or course I had a paint-shaker idle also...

amp 08-14-2006 07:45 AM


Originally Posted by JimmyJimboJet' post='832742' date='Aug 14 2006, 03:33 AM

..or course I had a paint-shaker idle also...

thats what it sounds like.. empty spray can shaken

rfreeman27 08-22-2006 06:24 AM

compression check.



Thats where I start for pretty much every problem haha...



The metalbar could be picking up the tick from the actual block, considering the primary injectors are bolted right into it...


All times are GMT -5. The time now is 07:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands