1fastsvn

ok. i have my lines hooked up to the waste gate solenoid. get full boost. all gears. but it takes too long to spool up. don't get full boost till 5-6k rpm. when i switch it to the pre-control, the boost comes quicker but it will only go up to 10 ( versus 12.5-13.0 psi when connected to the waste gate solenoid) then drop to 7-8 a second later. checked all the connections. seems ok. should i reset my pfc when i switch to the precontrol. if so how do you do it???? or is the solenoid fucked.. please help. my mods: intakes/cb/dp/mp/pfc/greddy smic. thanks. kevin

jspecracer7

go into the PFC Commander and turn off the sequential setting. Then connect ONLY the wastegate control. This should work for you.



I ran without it. Plugged a line directly into the wastegate actuator boosting .85(11psi) and it was fast as *****...

1fastsvn

you da man yup you were right. went into the settings on the pfc. misread it last time. it was asking seq system and i put yes. should have been no. maybe i will build up boost faster now. maybe i should learn japanese. seems like all the parts i buy are written in japenese i will test drive it later. at work right now. thanks van

jspecracer7

I won't build boost any faster. But it will be more reliable.