Need Some Help

Reply Subscribe

Thread Tools

Search this Thread

05-09-2003, 06:37 PM

RX7GEN3

Member

Thread Starter

Join Date: May 2003

Location: Down Under Australia

Posts: 46

My question is. Clutch goes in and I select a gear, Clutch comes out but car does not move.

It does this in all gears including reverse. And yes the motor is running.

Tyres are there, diffs there, tailsharft is there, Hell. what's wrong with it.

It was on the trailer from the last car show I took it to and went to take it off the trailer and it did not move.

I put it on the trailer a week ago and there was no problems.

We had to roll it off the trailer, and it rolled fine, no funny noices

05-09-2003, 07:09 PM

jspecracer7

Senior Member

Join Date: May 2002

Location: Okinawa, Japan

Posts: 4,928

How new is the clutch?

05-09-2003, 07:49 PM

RX7GEN3

Member

Thread Starter

Join Date: May 2003

Location: Down Under Australia

Posts: 46

About 6 months old and only got 2000 KM on it.

05-09-2003, 09:43 PM

jspecracer7

Senior Member

Join Date: May 2002

Location: Okinawa, Japan

Posts: 4,928

Then you've got a problem with either the clutch fork or the hydraulic system.

05-10-2003, 09:27 PM

RX7GEN3

Member

Thread Starter

Join Date: May 2003

Location: Down Under Australia

Posts: 46

Thanks for that jspecracer7. The problem is with the hydraulic system. When the clutch goes in, the fork moves but when I let go of the clutch the fork stay's out. It could be the hydraulic system.