|
You can see if there is any interest, no one likes to get screwed over. Start small with maybe 5 or 10 and see how it goes.
|
not really interested in *seeing how it goes* though... if someone is serious enough to buy the whole deal, i highly doubt that a $200 PRE payment and about a weekish wait is to much to ask. if someone would not be willing to do that then they can fend for themselfs so to speak. i have a good enough reputation of being honest guy between the two boards, ebay, partstrader and just plain people knowing me. https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
I don't want you to get ripped off.
|
oh i know that! https://www.nopistons.com/forums/pub...DIR#>/wink.png https://www.nopistons.com/forums/pub...IR#>/smile.png and i am not trying to rip anyone off... hell rx7.com sells JUST the rail and injectors for $598... BUT no pre assembled lines/fittings that will total out to about $200 easily, no shipping included, i dont believe they include injector clips (about $10 each), the rail design they use will not allow you to upgrade to a top feed primary anytime down the road really....
|
wow...renewed interest in fuel. This is what I run:
2 stock FD pumps...one for the primary and one for the secondary. 2 1680cc top feed low impedance bosch injectors 2 550cc stock injectors PPR 2ndary fuel rail with -6 a/n fittings Stock primary rail tapped with 3/8 npt and -6 a/n fittings aeroquip fpr(which is also they "Y") Return line via the stock metal lines that went to the charcoal canister. Bulk head fitting on the fuel pump assembly as the return. all -6 and a/n fittings. NEVER had any problems with fuel except for tightening down a/n fittings too tight. https://www.nopistons.com/forums/pub...IR#>/blink.png |
Originally Posted by rxrotary2_7' date='Jul 23 2003, 10:02 PM
i can supply you with
the secondary rail and mounting hardware 2 new 1680cc injectors and the clips a tapped primary rail (OEM so all you have to do is pop your current injectors in) ALL the braded line and fittings already assembled resistors if running a PFC this will replace your fuel system form the firewall up and back... basicly a bolt on and all you have to supply is a regulator and fuel guage. (i can do that for additional also) takes all the guess work out of the process. the price for all this is $510 shipped. https://www.nopistons.com/forums/pub...DIR#>/wink.png if you want a breakdown rail= $130 1680cc injectors =$150 (for both) all needed lines and fittings pre assembled =$220 injector clips = included resistors already soldered on clips= included... $10 shipping total= $510 if you would like the rail anodized any special color just ask. https://www.nopistons.com/forums/pub...DIR#>/wink.png BTW, i would need a refundable deposit until i recieve your primary rail. https://www.nopistons.com/forums/pub...IR#>/smile.png any interest just email me rxrotary2_7@yahoo.com |
Originally Posted by 9BASE3' date='Jul 24 2003, 11:14 PM
[quote name='rxrotary2_7' date='Jul 23 2003, 10:02 PM'] i can supply you with
the secondary rail and mounting hardware 2 new 1680cc injectors and the clips a tapped primary rail (OEM so all you have to do is pop your current injectors in) ALL the braded line and fittings already assembled resistors if running a PFC this will replace your fuel system form the firewall up and back... basicly a bolt on and all you have to supply is a regulator and fuel guage. (i can do that for additional also) takes all the guess work out of the process. the price for all this is $510 shipped. https://www.nopistons.com/forums/pub...DIR#>/wink.png if you want a breakdown rail= $130 1680cc injectors =$150 (for both) all needed lines and fittings pre assembled =$220 injector clips = included resistors already soldered on clips= included... $10 shipping total= $510 if you would like the rail anodized any special color just ask. https://www.nopistons.com/forums/pub...DIR#>/wink.png BTW, i would need a refundable deposit until i recieve your primary rail. https://www.nopistons.com/forums/pub...IR#>/smile.png any interest just email me rxrotary2_7@yahoo.com go with the aeroquip FPR. when my wastegate line blew off and I boosted 2.6 kilos(that is not a typo btw), my fuel pressure actually held just fine...course my motor didn't but that's another story. https://www.nopistons.com/forums/pub...IR#>/blink.png |
Originally Posted by jspecracer7' date='Jul 24 2003, 08:17 AM
when my wastegate line blew off and I boosted 2.6 kilos
Holy ****! |
Originally Posted by 9BASE3' date='Jul 24 2003, 11:25 PM
[quote name='jspecracer7' date='Jul 24 2003, 08:17 AM'] when my wastegate line blew off and I boosted 2.6 kilos
Holy ****! [/quote] lol...I acutally guessed it was 2.6... My defi gauge reads only to 2.0 kilos boost. The "Peak" needle was actually at "E"...as in P(needle here)AK...lol |
Holy **** is right, damn LOL!!!!
|
| All times are GMT -5. The time now is 07:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands