|
Originally Posted by 93 R1' date='Jul 23 2003, 12:08 PM
I wouldn't run 1300's due to the horror stories I've heard about them. Go with 1600's and a different rail.
Don't have the setup yet but when you figure it out let me know;) |
https://www.nopistons.com/forums/pub...1047683621.gif but whats with that damn cow sig???
|
Originally Posted by IGGER-IKE-EW-FD3S' date='Jul 23 2003, 02:43 PM
[quote name='93 R1' date='Jul 23 2003, 12:08 PM'] I wouldn't run 1300's due to the horror stories I've heard about them. Go with 1600's and a different rail.
Don't have the setup yet but when you figure it out let me know;) also if you go with the 1600 >1680cc injectors dont forget to get the resistors to solder in and the new connectors for the injectors |
Originally Posted by Travisty' date='Jul 23 2003, 02:45 PM
https://www.nopistons.com/forums/pub...1047683621.gif but whats with that damn cow sig???
|
Originally Posted by IGGER-IKE-EW-FD3S' date='Jul 23 2003, 05:48 PM
thats my buddy the moderator messin with me
ok back to the thread that i have no knowledgable input on |
https://www.nopistons.com/forums/pub...1047683621.gif by the way can someone mess with dragon as a payback for messing with my signature https://www.nopistons.com/forums/pub...1047683329.gif please https://www.nopistons.com/forums/pub...O_DIR#>/11.gif please https://www.nopistons.com/forums/pub...1047683785.gif
|
i can supply you with
the secondary rail and mounting hardware 2 new 1680cc injectors and the clips a tapped primary rail (OEM so all you have to do is pop your current injectors in) ALL the braded line and fittings already assembled resistors if running a PFC this will replace your fuel system form the firewall up and back... basicly a bolt on and all you have to supply is a regulator and fuel guage. (i can do that for additional also) takes all the guess work out of the process. the price for all this is $510 shipped. https://www.nopistons.com/forums/pub...DIR#>/wink.png if you want a breakdown rail= $130 1680cc injectors =$150 (for both) all needed lines and fittings pre assembled =$220 injector clips = included resistors already soldered on clips= included... $10 shipping total= $510 if you would like the rail anodized any special color just ask. https://www.nopistons.com/forums/pub...DIR#>/wink.png BTW, i would need a refundable deposit until i recieve your primary rail. https://www.nopistons.com/forums/pub...IR#>/smile.png any interest just email me rxrotary2_7@yahoo.com |
i have top feed primary rails too.... http://www.3rdgenrx7.com/keithsrails.htm
|
where were you when I bough mine? It would be nice to get a package deal. Group Buy? Could help alot of people out, if you could support that.
|
i have been around. there are many people with the setup already. https://www.nopistons.com/forums/pub...DIR#>/wink.png
group buy? i'm down. i would need some money up front if that were to happen just to make sure i dont get burned before going and investing in $1,000,000 worth of crap. https://www.nopistons.com/forums/pub...DIR#>/wink.png |
| All times are GMT -5. The time now is 07:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands