vac line help
10-01-2007, 04:44 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
alright so its been like forever since i looked at 2nd gen vac hose routing, plus i have a 3rd gen uim on the car now so its even a bit more confusing.
but my main question is, the little vac nipples by the injectors, do i have to hook these up to anything?
for those who dont know, car is highly modified, 0 stock stuff so i'm only asking if i should block them off or run them somewhere because i obviously cant run it to so stock location.
also i got an hks wastegate, nipple on side and nipple on top, what goes where with that?
and last thing, what is the normal size off the vac lines on the motor, 6mm?
car's so close to running.
kevin.
but my main question is, the little vac nipples by the injectors, do i have to hook these up to anything?
for those who dont know, car is highly modified, 0 stock stuff so i'm only asking if i should block them off or run them somewhere because i obviously cant run it to so stock location.
also i got an hks wastegate, nipple on side and nipple on top, what goes where with that?
and last thing, what is the normal size off the vac lines on the motor, 6mm?
car's so close to running.
kevin.
10-01-2007, 04:53 PM
#4
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
the nipple by the injector is some sort of air bleed, i dont think you NEED it, but thats one of those i dont know what it does, so i hook it up. on the stock t2 it goes to the back of the intake maniold
for the WG look at the instructions! they are online, www.hksusa.com its simple to hook up, so simple, i dont remember...
normal sizes are 3.5mm bigger ones are 6 and 8mm
for the WG look at the instructions! they are online, www.hksusa.com its simple to hook up, so simple, i dont remember...
normal sizes are 3.5mm bigger ones are 6 and 8mm
10-03-2007, 02:29 PM
#5
Senior Member
Join Date: Aug 2005
Posts: 165
Originally Posted by j9fd3s' post='883917' date='Oct 1 2007, 04:53 PM
the nipple by the injector is some sort of air bleed, i dont think you NEED it, but thats one of those i dont know what it does, so i hook it up. on the stock t2 it goes to the back of the intake maniold
for the WG look at the instructions! they are online, www.hksusa.com its simple to hook up, so simple, i dont remember...
normal sizes are 3.5mm bigger ones are 6 and 8mm
for the WG look at the instructions! they are online, www.hksusa.com its simple to hook up, so simple, i dont remember...
normal sizes are 3.5mm bigger ones are 6 and 8mm
Mine are all capped off. Only vacuum lines you need are oil injectors (unless premix), brake booster, and I don't know your EMS or boost control options, so lets say 2-4 there.
I love no emissions!!!
10-03-2007, 04:50 PM
#6
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
yea i basically narrowed it down to:
1) Brake Booster
2) Boost Gauge
3) BOV
4) WG
5) FPR
everything else im just gonna cap me thinks. i hate when i have to start doing the little detail ****.
kevin.
1) Brake Booster
2) Boost Gauge
3) BOV
4) WG
5) FPR
everything else im just gonna cap me thinks. i hate when i have to start doing the little detail ****.
kevin.
Thread
Thread Starter
Forum
Replies
Last Post
JDMjim
2nd Generation Specific
5
10-08-2003 02:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)