Turbo Questions
10-06-2007, 03:47 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
I am looking at purchasing a larger turbo for my 87 TII. I have gone through the calculations (with a T3-50), but I do not know what the numbers mean?
From some reading (and correct me if I am wrong please), the T3 is a flange style, and the 50 the trim? I am not sure how to do so. I am looking to be in the 300 to 350 hp range, and going through the calcs, the T3-50 seems to work so that I am not surging the turbo. It shows that I will have full boost of 12psi at 3500rpm and hold until 7000rpm. Any thoughts on this? Thanks.
CHRIS
From some reading (and correct me if I am wrong please), the T3 is a flange style, and the 50 the trim? I am not sure how to do so. I am looking to be in the 300 to 350 hp range, and going through the calcs, the T3-50 seems to work so that I am not surging the turbo. It shows that I will have full boost of 12psi at 3500rpm and hold until 7000rpm. Any thoughts on this? Thanks.
CHRIS
10-06-2007, 04:29 PM
#3
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
Would a T04B with a 49 trim, 1.32 A/R exhaust, and .6 A/R compressor work? What I am looking for is a fast spooling turbo (fully around 3500 to 4000) of 12 psi, and around 300-350 hp. Thanks again.
CHRIS
CHRIS
Thread
Thread Starter
Forum
Replies
Last Post
RotavationTurboFB
2nd Generation Specific
3
08-13-2008 10:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)