2nd Generation Specific 1986-1992 Discussion

Power Windows Dont Work-what Should I Check?

Old May 17, 2004 | 09:02 PM
  #11  
Shane.Trammell's Avatar
Senior Member
 
Joined: May 2002
Posts: 4,326
From: Richardson Texas
Default

if there is a 30a fuse in that spot its the same
Old May 21, 2004 | 04:46 PM
  #12  
rosey's Avatar
Junior Member
 
Joined: Jan 2004
Posts: 9
Default

My drivers side window works great, but my passenger side won't move an inch. I checked the fuse, cleaned the rails, took apart the driver and pass. switch and cleaned the contacts, but it still wouldn't work.



I ordered a rebulit drivers side switch a few days ago, I'll tell ya if I have any luck, in the mean time, just clean the contacts and see if that works.
Old May 21, 2004 | 08:24 PM
  #13  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

Originally Posted by rosey' date='May 21 2004, 05:46 PM
My drivers side window works great, but my passenger side won't move an inch. I checked the fuse, cleaned the rails, took apart the driver and pass. switch and cleaned the contacts, but it still wouldn't work.



I ordered a rebulit drivers side switch a few days ago, I'll tell ya if I have any luck, in the mean time, just clean the contacts and see if that works.
did you try to jump the motor with 12volts to see if it even works?

maybe the motor is bad
Old May 21, 2004 | 09:06 PM
  #14  
rosey's Avatar
Junior Member
 
Joined: Jan 2004
Posts: 9
Default

Originally Posted by Rob x-7' date='May 21 2004, 05:24 PM
did you try to jump the motor with 12volts to see if it even works?

maybe the motor is bad
That would be the next step, I would have already tried it, but I don't know what wires to connect to what.
Old May 21, 2004 | 11:54 PM
  #15  
NCTII87's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2004
Posts: 218
From: Bahama(Durham), NC
Default

**** on this- anybody got any se doors they wanna sell? i wanna lose a few pounds n get some manual doors!
Old May 22, 2004 | 02:29 PM
  #16  
NCTII87's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2004
Posts: 218
From: Bahama(Durham), NC
Default

just pulled my door apart and tried all the **** i knew how to. i had to replace my fuse- it was blown as hell. i tried just jumpin a screwdriver across a couple of the wire ends with nothin but a few sparks and a blown fuse as a result, atleast i know its gettin power from somewhere. i just took my entire door off in the end, hopefully the doors on my GXL will help solve this one. jeezus, anybody wanna trade some doors from a base for these? it would solve soo many problems for me!
Old May 22, 2004 | 02:44 PM
  #17  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

Originally Posted by rosey' date='May 21 2004, 10:06 PM
That would be the next step, I would have already tried it, but I don't know what wires to connect to what.
there is only 2 wires going to the motor, you ground one and

12volt the other, then switch it, depending on which one gets power

it will either go up or down, simply switch the wires to go up

or down
Old May 25, 2004 | 06:33 PM
  #18  
rosey's Avatar
Junior Member
 
Joined: Jan 2004
Posts: 9
Default

Originally Posted by Rob x-7' date='May 22 2004, 11:44 AM
there is only 2 wires going to the motor, you ground one and

12volt the other, then switch it, depending on which one gets power

it will either go up or down, simply switch the wires to go up

or down
Ahh, I guess I'll try that tonight, the switch didn't fix my problem
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Buzzbomb
1st Generation Specific
12
Jun 21, 2007 08:36 PM
CrassFC3S
Insert BS here
20
Jun 16, 2004 05:09 PM
croffeyc
2nd Generation Specific
5
Jul 1, 2003 10:42 AM
87rx7TurboII
2nd Generation Specific
4
Jul 26, 2002 07:21 PM
1Revvin7
Insert BS here
3
Mar 10, 2002 06:05 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:17 AM.