Power Windows Dont Work-what Should I Check?
05-21-2004, 04:46 PM
#12
Junior Member
Join Date: Jan 2004
Posts: 9
My drivers side window works great, but my passenger side won't move an inch. I checked the fuse, cleaned the rails, took apart the driver and pass. switch and cleaned the contacts, but it still wouldn't work.
I ordered a rebulit drivers side switch a few days ago, I'll tell ya if I have any luck, in the mean time, just clean the contacts and see if that works.
I ordered a rebulit drivers side switch a few days ago, I'll tell ya if I have any luck, in the mean time, just clean the contacts and see if that works.
05-21-2004, 08:24 PM
#13
Super Moderator
Join Date: Feb 2002
Location: Amityville, New York
Posts: 12,288
Originally Posted by rosey' date='May 21 2004, 05:46 PM
My drivers side window works great, but my passenger side won't move an inch. I checked the fuse, cleaned the rails, took apart the driver and pass. switch and cleaned the contacts, but it still wouldn't work.
I ordered a rebulit drivers side switch a few days ago, I'll tell ya if I have any luck, in the mean time, just clean the contacts and see if that works.
I ordered a rebulit drivers side switch a few days ago, I'll tell ya if I have any luck, in the mean time, just clean the contacts and see if that works.
maybe the motor is bad
05-21-2004, 09:06 PM
#14
Junior Member
Join Date: Jan 2004
Posts: 9
Originally Posted by Rob x-7' date='May 21 2004, 05:24 PM
did you try to jump the motor with 12volts to see if it even works?
maybe the motor is bad
maybe the motor is bad
05-22-2004, 02:29 PM
#16
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Bahama(Durham), NC
Posts: 218
just pulled my door apart and tried all the **** i knew how to. i had to replace my fuse- it was blown as hell. i tried just jumpin a screwdriver across a couple of the wire ends with nothin but a few sparks and a blown fuse as a result, atleast i know its gettin power from somewhere. i just took my entire door off in the end, hopefully the doors on my GXL will help solve this one. jeezus, anybody wanna trade some doors from a base for these? it would solve soo many problems for me!
05-22-2004, 02:44 PM
#17
Super Moderator
Join Date: Feb 2002
Location: Amityville, New York
Posts: 12,288
Originally Posted by rosey' date='May 21 2004, 10:06 PM
That would be the next step, I would have already tried it, but I don't know what wires to connect to what.
12volt the other, then switch it, depending on which one gets power
it will either go up or down, simply switch the wires to go up
or down
05-25-2004, 06:33 PM
#18
Junior Member
Join Date: Jan 2004
Posts: 9
Originally Posted by Rob x-7' date='May 22 2004, 11:44 AM
there is only 2 wires going to the motor, you ground one and
12volt the other, then switch it, depending on which one gets power
it will either go up or down, simply switch the wires to go up
or down
12volt the other, then switch it, depending on which one gets power
it will either go up or down, simply switch the wires to go up
or down
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)