2nd Generation Specific 1986-1992 Discussion

Power Window Problem

Thread Tools
 
Search this Thread
 
Old 11-19-2010, 01:10 PM
  #1  
Junior Member
Thread Starter
 
87RX7drift's Avatar
 
Join Date: Oct 2010
Location: Kansas City
Posts: 8
Default

okay so basically my passenger's side window has stopped working. i tested the motor with a motocycle battery and the motor worked, and then we checked the switch using a voltage meeter and it was testing positive electrical contuity. So it has to be the middle man between the switch, and the motor. both are working and i am lost. i have no idea what is happening and need some help. i know that the passenger side switch hasnt been working at all but my drivers side switch will allow the window to go down but not up. could anyone help me please?
87RX7drift is offline  
Old 11-19-2010, 01:35 PM
  #2  
Administrator
 
phinsup's Avatar
 
Join Date: Jul 2001
Location: Stuart, FL
Posts: 24,416
Default

Is the motor kicking on and not running the window when you flip the switch or does it not kick on at all.



Contacts in the switch are known to go bad, if the motor is kicking on but the window isn't moving then it's probably the regulator.
phinsup is offline  
Old 11-19-2010, 01:52 PM
  #3  
Junior Member
Thread Starter
 
87RX7drift's Avatar
 
Join Date: Oct 2010
Location: Kansas City
Posts: 8
Default

Originally Posted by phinsup
Is the motor kicking on and not running the window when you flip the switch or does it not kick on at all.



Contacts in the switch are known to go bad, if the motor is kicking on but the window isn't moving then it's probably the regulator.




umm yeah, like if i hook up the motor to a battery the windown goes up and down. so i know the motor is good, i think i will clean the contacts, should i do that on both the drivers side and passengers?
87RX7drift is offline  
Old 11-19-2010, 03:30 PM
  #4  
Senior Member
 
RX7 13B 4 UR AZZ's Avatar
 
Join Date: Feb 2003
Location: Miami, Florida
Posts: 1,591
Default

the drivers side wears considerably more than the passenger side so it would be fine to just do the drivers side. unless the passenger side gets fubared if not drivers only IMO
RX7 13B 4 UR AZZ is offline  
Old 12-06-2010, 12:20 AM
  #5  
Member
 
camogreenfc3s's Avatar
 
Join Date: May 2009
Posts: 39
Default

take the switch apart its held on with 3 screws there are little contacts on the switches take the corrsion with wire bush or razor blades... these usually get super bloack with corossion and they stop the motors from getting current...
camogreenfc3s is offline  
Old 05-15-2011, 09:04 PM
  #6  
Junior Member
Thread Starter
 
87RX7drift's Avatar
 
Join Date: Oct 2010
Location: Kansas City
Posts: 8
Default

okay so i know its been awhile since i last posted about this, but its spring and now i need my window to roll down again and i found out that the contacts are good, the driver side works and the motor works for the passenger side works too. We found out its getting power to both switches, im not sure why it still wont work., what exactly does the window regulator do? the manual told me all it does it hold the window up and push that up and down and that works. im pretty sure its something with the electrical, not sure, any suggestions?
87RX7drift is offline  
Old 05-22-2011, 03:42 AM
  #7  
Senior Member
 
RicerJ's Avatar
 
Join Date: Dec 2008
Location: Folsom, CA
Posts: 737
Default

Convert to manual you will never have a problem with it again
RicerJ is offline  
Old 06-07-2011, 05:33 PM
  #8  
Junior Member
 
ryosuke_takahashi's Avatar
 
Join Date: Sep 2008
Posts: 4
Default

http://www.rx7club.com/showthread.php?t=924932 this guy had same problem and some electrickery guru seems to know how to check where you are and arent getting what you need to have it work.
ryosuke_takahashi is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
racerxtreme7
2nd Generation Specific
1
07-11-2003 07:52 PM
serpent12
2nd Generation Specific
4
01-30-2003 11:03 AM
pmr2000
2nd Generation Specific
13
10-31-2002 08:59 PM
JOSEPH
2nd Generation Specific
4
08-17-2002 05:08 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Power Window Problem



All times are GMT -5. The time now is 02:06 PM.