2nd Generation Specific 1986-1992 Discussion

Need some help

Thread Tools
 
Search this Thread
 
Old 07-01-2007, 09:41 AM
  #1  
Junior Member
Thread Starter
 
rickyw's Avatar
 
Join Date: Jul 2007
Posts: 1
Thumbs down

So I am new to the board but I am a frequent poster on a couple of other boards so i know about the search button. I am new to Rotory engines so if i ask stupid questions im sorry. I tried to search but couldn't really find what I was looking for or if i found the right thing then i wouldn't know either.



So here is the situation:



1989 rx7 n/a with almost 150k 5spd Hasn't been started in a year with a little bit of gas that was in there also.



Went to go look at it today and take it for a test drive. Car started rough (because of the old gas) and puffed some white smoke out. Ran it till it was empty to make sure the bad gas was all out. Put new gas in and started it no smoke. drove it around for a while and stopped and turned the car off . This is were I need help with we noticed some smoke coming from the passenger side in the engine compartment. we popped open the hood and noticed that were the exhaust manifold was at there was smoke coming from there. after some time (10 mins) it dwindled down to nothing. We proceeded to start the car up again to see if it would smoke when the car was running, it would not. So we again drove it around to see if there were any problems got back to the sellers house. and once again there was the smoke comming from within the engine compartment around the manifold area. Now we know the seller they have only owned it 2 years and have only driven it for 1 of those two years and never were hard on the car. They also never had this problem before hand. There is alot of dust in the engine compartment and again the car hasnt been driven for a year so my thought is maybe some old grease or dust may be on the manifold. However I cant see because it has a metal shroud over the manifold. Does anyone know if this is a bad sign? Again it only starts once the engine is stopped and turned off and it comes from the manifold area.



Sorry for the LONGGGG first post but want to know before we buy the car on monday. Also for posting this twice but I really need some help if this is a problem.



Regards,



Rick
rickyw is offline  
Old 07-02-2007, 12:08 PM
  #2  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

you should look a little deeper, but its likely to be a leaf or something thats there from sitting
j9fd3s is offline  
Old 07-02-2007, 07:38 PM
  #3  
Super Moderator
 
1988RedT2's Avatar
 
Join Date: Apr 2002
Location: VA
Posts: 2,532
Default

Chipmunks and mice have a way of building homes in cars that have been sitting for a year. There were lots of nut shells packed around the turbo on my T2. Made for some anxious moments the first few times the car ran.
1988RedT2 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
falcoln
1st Generation Specific
12
10-17-2007 09:02 PM
nopistons94
3rd Generation Specific
11
05-11-2007 10:13 AM
up&coming
2nd Generation Specific
7
10-07-2003 09:17 PM
1987rx7guy
Interior, Exterior, Audio Mods
1
06-24-2003 07:19 PM
Seppuku
Insert BS here
4
03-29-2002 07:12 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Need some help



All times are GMT -5. The time now is 01:26 AM.