NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Need some help (https://www.nopistons.com/2nd-generation-specific-17/need-some-help-66499/)

rickyw 07-01-2007 09:41 AM

So I am new to the board but I am a frequent poster on a couple of other boards so i know about the search button. I am new to Rotory engines so if i ask stupid questions im sorry. I tried to search but couldn't really find what I was looking for or if i found the right thing then i wouldn't know either.



So here is the situation:



1989 rx7 n/a with almost 150k 5spd Hasn't been started in a year with a little bit of gas that was in there also.



Went to go look at it today and take it for a test drive. Car started rough (because of the old gas) and puffed some white smoke out. Ran it till it was empty to make sure the bad gas was all out. Put new gas in and started it no smoke. drove it around for a while and stopped and turned the car off . This is were I need help with we noticed some smoke coming from the passenger side in the engine compartment. we popped open the hood and noticed that were the exhaust manifold was at there was smoke coming from there. after some time (10 mins) it dwindled down to nothing. We proceeded to start the car up again to see if it would smoke when the car was running, it would not. So we again drove it around to see if there were any problems got back to the sellers house. and once again there was the smoke comming from within the engine compartment around the manifold area. Now we know the seller they have only owned it 2 years and have only driven it for 1 of those two years and never were hard on the car. They also never had this problem before hand. There is alot of dust in the engine compartment and again the car hasnt been driven for a year so my thought is maybe some old grease or dust may be on the manifold. However I cant see because it has a metal shroud over the manifold. Does anyone know if this is a bad sign? Again it only starts once the engine is stopped and turned off and it comes from the manifold area.



Sorry for the LONGGGG first post but want to know before we buy the car on monday. Also for posting this twice but I really need some help if this is a problem.



Regards,



Rick

j9fd3s 07-02-2007 12:08 PM

you should look a little deeper, but its likely to be a leaf or something thats there from sitting

1988RedT2 07-02-2007 07:38 PM

Chipmunks and mice have a way of building homes in cars that have been sitting for a year. There were lots of nut shells packed around the turbo on my T2. Made for some anxious moments the first few times the car ran.


All times are GMT -5. The time now is 01:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands