Hey ive been doing some research on your FAQ section and discovered that my 5th 6th ports are not opening.I noticed a hose under the left actuater on passenger side of the engine is missing.Its just a nipple wich i believe is called the (auxilary port nipple) im a newbie. I purchased a new hose but dont have a clue where to connect it once its attached to the aux/port nipple. Did a search for some photos but all i could see is the hose leaving the A/P but none showing what it connects to.Is this the reason why they are not opening???Please help cuz im going bananas trying figure this sh*% out already.Oh btw i removed the solenoids and was able to rotate the sleeves pretty easily to around 6 o,clock so they're not jammed in anyway.Also going to try the ATF trick once i get it operating.I dont want any of that crap thats been building up from the ports not operating swimming with the rotors and apex seals.Thanks- TECH 7

 

it should connect to the line that goes to the cat. there should be a nipple on there. if you dont have a cat then theres no where to connect it unless you or someone had a line installed after the cat was removed