2nd Generation Specific 1986-1992 Discussion

My Rx7 S4 need some help

Thread Tools
 
Search this Thread
 
Old Aug 12, 2008 | 07:23 AM
  #1  
alanip's Avatar
Thread Starter
Junior Member
 
Joined: May 2008
Posts: 3
Default

HI there

my car is having miss fire when the engine is under load,

i can rev the engine to red line no problem when the car is not in the gear,

but while i am driving it

when i gas it a little bit more, it feel like hitting the fuel cut when the engine is rev between 1500 to 4000 rpm .



this was happen after i have done 3 mins burn out.

what wrong with my car ?

Air flow meter ?

spark plug ?

wires?

coil ?



any one please help
Old Aug 12, 2008 | 09:46 AM
  #2  
1988RedT2's Avatar
Super Moderator
 
Joined: Apr 2002
Posts: 2,535
From: VA
Default

Check for loose grounds, broken wires. Sounds like the secondary injectors may not be firing?
Old Aug 12, 2008 | 11:16 AM
  #3  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

either the spark plug wires or the secondary injectors are good starting places
Old Aug 12, 2008 | 03:37 PM
  #4  
Mazdaracer4fun's Avatar
Member
 
Joined: Sep 2007
Posts: 87
Talking

CHECK ENGINE CODES FIRST!

then check fuel pressure, should be around 34psi

then check spark, (use the light up spark tester NOT any back yard methods lol)

then check resistor Ohms resistance, (

then check or change plugs and wires ...

also check the pressure sensor ohm resistors,

check or change Air Flow Meter .. (i have one for sale cheap 45$ shipped) (for 86-88 rx7s only) lol



looking in mitchell now for any other things to test ... lemme know if this stuff helps and what your findings are ...



btw you WILL need a Multimeter for the tests
Old Aug 13, 2008 | 02:27 AM
  #5  
alanip's Avatar
Thread Starter
Junior Member
 
Joined: May 2008
Posts: 3
Default

Originally Posted by Mazdaracer4fun' post='906309' date='Aug 12 2008, 01:37 PM
CHECK ENGINE CODES FIRST!

then check fuel pressure, should be around 34psi

then check spark, (use the light up spark tester NOT any back yard methods lol)

then check resistor Ohms resistance, (

then check or change plugs and wires ...

also check the pressure sensor ohm resistors,

check or change Air Flow Meter .. (i have one for sale cheap 45$ shipped) (for 86-88 rx7s only) lol



looking in mitchell now for any other things to test ... lemme know if this stuff helps and what your findings are ...



btw you WILL need a Multimeter for the tests


how do i check the enigne code?

if i gas the car slowly, if will run normally, no miss to redline

and today when i hear a very loud back fire noise.

looks like my car is not spark well for some reason...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thebigbluecan
2nd Generation Specific
3
Sep 30, 2007 03:04 PM
nopistons94
3rd Generation Specific
11
May 11, 2007 10:13 AM
VeilsideFD13b
3rd Generation Specific
4
May 23, 2006 09:28 PM
up&coming
2nd Generation Specific
7
Oct 7, 2003 09:17 PM
1987rx7guy
Interior, Exterior, Audio Mods
1
Jun 24, 2003 07:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:11 AM.