NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   My Rx7 S4 need some help (https://www.nopistons.com/2nd-generation-specific-17/my-rx7-s4-need-some-help-70445/)

alanip 08-12-2008 07:23 AM

HI there

my car is having miss fire when the engine is under load,

i can rev the engine to red line no problem when the car is not in the gear,

but while i am driving it

when i gas it a little bit more, it feel like hitting the fuel cut when the engine is rev between 1500 to 4000 rpm .



this was happen after i have done 3 mins burn out.

what wrong with my car ?

Air flow meter ?

spark plug ?

wires?

coil ?



any one please help

1988RedT2 08-12-2008 09:46 AM

Check for loose grounds, broken wires. Sounds like the secondary injectors may not be firing?

j9fd3s 08-12-2008 11:16 AM

either the spark plug wires or the secondary injectors are good starting places

Mazdaracer4fun 08-12-2008 03:37 PM

CHECK ENGINE CODES FIRST!

then check fuel pressure, should be around 34psi

then check spark, (use the light up spark tester NOT any back yard methods lol)

then check resistor Ohms resistance, (

then check or change plugs and wires ...

also check the pressure sensor ohm resistors,

check or change Air Flow Meter .. (i have one for sale cheap 45$ shipped) (for 86-88 rx7s only) lol



looking in mitchell now for any other things to test ... lemme know if this stuff helps and what your findings are ...



btw you WILL need a Multimeter for the tests

alanip 08-13-2008 02:27 AM


Originally Posted by Mazdaracer4fun' post='906309' date='Aug 12 2008, 01:37 PM
CHECK ENGINE CODES FIRST!

then check fuel pressure, should be around 34psi

then check spark, (use the light up spark tester NOT any back yard methods lol)

then check resistor Ohms resistance, (

then check or change plugs and wires ...

also check the pressure sensor ohm resistors,

check or change Air Flow Meter .. (i have one for sale cheap 45$ shipped) (for 86-88 rx7s only) lol



looking in mitchell now for any other things to test ... lemme know if this stuff helps and what your findings are ...



btw you WILL need a Multimeter for the tests



how do i check the enigne code?

if i gas the car slowly, if will run normally, no miss to redline

and today when i hear a very loud back fire noise.

looks like my car is not spark well for some reason...


All times are GMT -5. The time now is 12:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands