How to set timing?
#1
HI everyone hope you could help with a little problem im having with my 87 tii.
I bought the car in pieces, so in the process of putting it all back together i need to set tdc. I pulled the plugs on the rear rotor and turned the motor till i could see the apex seal and marked the crank. the exact middle of those marks is tdc for the front rotor? If this is true do i put the pully on so that the yellow mark is 5 degrees atdc? Alldata doesent have anything and i cant access the fsm from work.
Thanks
Mark
I bought the car in pieces, so in the process of putting it all back together i need to set tdc. I pulled the plugs on the rear rotor and turned the motor till i could see the apex seal and marked the crank. the exact middle of those marks is tdc for the front rotor? If this is true do i put the pully on so that the yellow mark is 5 degrees atdc? Alldata doesent have anything and i cant access the fsm from work.
Thanks
Mark
#4
Originally Posted by NotalesS' post='875326' date='Jun 17 2007, 02:00 PM
Get a timing gun. Runt he motor for a bit. and play with the CAS
Will do once its running. I found out its a JDM/S5 into a S4
so far I've found that Ill have to run pre-mix, had to splice and dice the tps sensor, and I dont have a spot for the radiator cap?????? Im going to search all the forums and see what to do about that one. Unless someone wants to help out??
Mark
Thread
Thread Starter
Forum
Replies
Last Post
kindahusky
2nd Generation Specific
4
07-21-2011 08:57 AM
Buzzbomb
1st Generation Specific
19
06-22-2006 06:37 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)