HI everyone hope you could help with a little problem im having with my 87 tii.
I bought the car in pieces, so in the process of putting it all back together i need to set tdc. I pulled the plugs on the rear rotor and turned the motor till i could see the apex seal and marked the crank. the exact middle of those marks is tdc for the front rotor? If this is true do i put the pully on so that the yellow mark is 5 degrees atdc? Alldata doesent have anything and i cant access the fsm from work. Thanks Mark |
nevermind, the timing pully will only go on one way.
Feel free to delete. |
Get a timing gun. Runt he motor for a bit. and play with the CAS
|
Originally Posted by NotalesS' post='875326' date='Jun 17 2007, 02:00 PM
Get a timing gun. Runt he motor for a bit. and play with the CAS Will do once its running. I found out its a JDM/S5 into a S4 https://www.nopistons.com/forums/pub...1047683664.gif so far I've found that Ill have to run pre-mix, had to splice and dice the tps sensor, and I dont have a spot for the radiator cap?????? Im going to search all the forums and see what to do about that one. Unless someone wants to help out?? Mark |
All times are GMT -5. The time now is 06:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands