Engine Swap
#1
If my motor requires to many new parts to rebuild I may swith toan fd motor.
do they make more power and how hard is the swap. does any drive line need to be changed. Just thinking out loud. I checked the engine swap section didn't look like it gtets much traffic.
Dave
do they make more power and how hard is the swap. does any drive line need to be changed. Just thinking out loud. I checked the engine swap section didn't look like it gtets much traffic.
Dave
#2
yes the fd motor makes more power but a well built fc t2 motor can make very good power aswell.
as far as the swap goes i highly recomend a full t2 drive line with the fd or t2 motor. and you will need new motor mounts ot mount the fd to the fc chassis.
then theres computer well i recomend a stand alone.
as far as the swap goes i highly recomend a full t2 drive line with the fd or t2 motor. and you will need new motor mounts ot mount the fd to the fc chassis.
then theres computer well i recomend a stand alone.
#3
The saying goes. If you have to ask, it costs too much. FD swap is $$$$. Look at Jims5543 RX-7. He has spent alot. It seems that the hot thing is to swap in a 13b-RE. I am guessing because of the engine mounts on the block??
#5
i did the 13bre swap in my car and no the mounts do not just mount to the block like a t2 , the re mounts like the fd! and its a horse a piece with any swap it all coast money , just how much do anyone of us want to spend.
now i went from the 89 gxl to jdm t2 swap with wolf 3d 3.0 and now im swaping to the cosmo 13b re with a wolf 4.0.
i have spent a **** load but love every bit of it.
now i went from the 89 gxl to jdm t2 swap with wolf 3d 3.0 and now im swaping to the cosmo 13b re with a wolf 4.0.
i have spent a **** load but love every bit of it.
#7
[quote name='chase78' date='Apr 25 2005, 03:59 AM']hey hope over to the 20b forum..... and think about getting a 3 rotor instaed of a 13b-rew.....
I priced it out and I can put one in a fc for about 7000-8000 not 20,000 like they say.
[/quote]
If you can do all the fabrication yourself you can pull off a 20B swap for around $10k. Theres a million little things that will nickel and dime you to death with the swap.
I priced it out and I can put one in a fc for about 7000-8000 not 20,000 like they say.
[snapback]704209[/snapback]
[/quote]
If you can do all the fabrication yourself you can pull off a 20B swap for around $10k. Theres a million little things that will nickel and dime you to death with the swap.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)