Coolant Elbow...
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 811
From: One hour north of chicago (Mundelein to be exact)
Does the metal coolant elbow from s4's fit in place of the plastic s5 piece? I currently have a metal pipe in the rad hose where I tapped the temp sensor for my gauge but I would like to put it on the elbow like my old FC.
Senior Member
Joined: Dec 2002
Posts: 4,837
From: Wayne, NJ
Originally Posted by rmaiersg' date='Feb 23 2004, 08:40 PM
Are there metal s5 elbows? I could have sworn the metal elbow i had, had three bolts.
or do what im doing and have a custom one made for the s5 waterpump.
altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks.
kevin.
Senior Member
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Originally Posted by teknics' date='Feb 23 2004, 11:57 PM
you COULD swap to an s4 pump and everything and then the metal thermostat housing would work.
or do what im doing and have a custom one made for the s5 waterpump.
altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks.
kevin.
or do what im doing and have a custom one made for the s5 waterpump.
altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks.
kevin.
Super Moderator
Joined: Sep 2002
Posts: 2,763
From: Savannah, Ga
Originally Posted by teknics' date='Feb 24 2004, 12:57 AM
you COULD swap to an s4 pump and everything and then the metal thermostat housing would work.
or do what im doing and have a custom one made for the s5 waterpump.
altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks.
kevin.
or do what im doing and have a custom one made for the s5 waterpump.
altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks.
kevin.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)