|
Does the metal coolant elbow from s4's fit in place of the plastic s5 piece? I currently have a metal pipe in the rad hose where I tapped the temp sensor for my gauge but I would like to put it on the elbow like my old FC.
|
nah.... 2 bolts on the s4...3 on s5....
|
the pattern is different too
|
Are there metal s5 elbows? I could have sworn the metal elbow i had, had three bolts.
|
Originally Posted by rmaiersg' date='Feb 23 2004, 08:40 PM
Are there metal s5 elbows? I could have sworn the metal elbow i had, had three bolts.
or do what im doing and have a custom one made for the s5 waterpump. altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks. kevin. |
Originally Posted by teknics' date='Feb 23 2004, 11:57 PM
you COULD swap to an s4 pump and everything and then the metal thermostat housing would work.
or do what im doing and have a custom one made for the s5 waterpump. altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks. kevin. |
Good idea. Thanks!
|
Originally Posted by teknics' date='Feb 24 2004, 12:57 AM
you COULD swap to an s4 pump and everything and then the metal thermostat housing would work.
or do what im doing and have a custom one made for the s5 waterpump. altho right now its all hose clamps and duct tape, and electrical tape....and it still leaks. kevin. |
| All times are GMT -5. The time now is 11:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands