20b In A Glc
Senior Member
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Originally Posted by Jeff20B' date='Jul 30 2003, 10:08 AM
I think I may have to trim it like you said. I even need to trim the oil pan for the MG. The rolled over edge cuts into the frame rails a little. That is, the pan on my REPU engine does. It has those cover things that hold the pan onto the gasket. I guess Mazda deleted them and went with a flat gasket surface on later pans. Anyway, I've got a newer 13B pan with a flat gasket surface that should give me enough clearance. The bolt heads will be closer to the engine soI'll be able to use shorter bolts, and I'll probably trim the rolled over edge right on the rear corners to be on the safe side. Hopefully the 13B pan on the 20B won't need trimming.
Senior Member
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Originally Posted by Jeff20B' date='Aug 1 2003, 10:36 PM
I don't even have enough money to get everything I'll need for this 20B project.
I ordered some goodies today.
I ordered some goodies today.