It Wont Start
09-08-2003, 02:31 PM
#21
Senior Member
Join Date: Jun 2003
Location: Cedar Rapids, Iowa
Posts: 114
Hey, you said its a new starter, so is one of the cables on that loose? I replaced a started once and didn't get one of the lock nuts on tight and it would intermitantly work. Guess its a place to look 
09-08-2003, 05:07 PM
#22
Senior Member
Thread Starter
Join Date: Dec 2001
Posts: 285
Ok added a push button starter. Then I got the Bronco out and took it up the drive way. First pop nothing, second pop it started! I drove around for a little while still snatches 2nd with ease Parked it and tried to start it again same problem?
09-08-2003, 08:15 PM
#23
Senior Member
Join Date: Aug 2003
Location: panama city, florida
Posts: 249
GROUND!
Theres only two things it can be.
Bad ground
Bad starter solenoid.
If the starter is new, then that leaves ground.
It'll either be the ground on the battery(doubtful), or the ground on the starter(more likely), or one of the few grounds to the frame from(or to) the starter.
If none of this works, or you have this problem every once in a while, have your starter tested, the solenoid is bad.
Theres only two things it can be.
Bad ground
Bad starter solenoid.
If the starter is new, then that leaves ground.
It'll either be the ground on the battery(doubtful), or the ground on the starter(more likely), or one of the few grounds to the frame from(or to) the starter.
If none of this works, or you have this problem every once in a while, have your starter tested, the solenoid is bad.
Thread
Thread Starter
Forum
Replies
Last Post
n2audio77
2nd Generation Specific
13
05-26-2002 10:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)