New Coilover Kit Using Blisten Shocks For Fc?
Thread Starter
Senior Member
Joined: Nov 2002
Posts: 3,108
Anyone seen this?
Strut tubes are fabricated to match the dimensions of the P30 Bilsteins using thick-walled tubing and mounting brackets, providing a much stronger strut., enabling it to take more abuse without bending or deforming. Optimized for E-Production ride heights, the spindle is mounted approximately 1.5" higher than on the 0000-04-7201-AC kit that we sell, which allows for adequate shock travel without binding the shock or spring during compression. Kit includes (2) fabricated strut tubes, (2) threaded sleeves, (2) lower spring perches. Springs and shocks are not included.
CARTRIDGE, FRONT STRUT - BILSTEIN 2 RX-7 ALL 1986-91 $121.90
Notes: #P30-0032. Available through special order. Requires ring nuts Bilstein # B30-U232A1 (2).
courtesy of mazdaspeed motorsports
Strut tubes are fabricated to match the dimensions of the P30 Bilsteins using thick-walled tubing and mounting brackets, providing a much stronger strut., enabling it to take more abuse without bending or deforming. Optimized for E-Production ride heights, the spindle is mounted approximately 1.5" higher than on the 0000-04-7201-AC kit that we sell, which allows for adequate shock travel without binding the shock or spring during compression. Kit includes (2) fabricated strut tubes, (2) threaded sleeves, (2) lower spring perches. Springs and shocks are not included.
CARTRIDGE, FRONT STRUT - BILSTEIN 2 RX-7 ALL 1986-91 $121.90
Notes: #P30-0032. Available through special order. Requires ring nuts Bilstein # B30-U232A1 (2).
courtesy of mazdaspeed motorsports
Senior Member
Joined: Dec 2001
Posts: 2,934
From: Jensen Beach, FL / Sylva, NC
I beleive this is the setup O'Bleans runs in his BP car. I had heard a rumor that Blistein gave him a setup to use. It must be nice. I want to win at the nationals so I can get free stuff too.
Thread Starter
Senior Member
Joined: Nov 2002
Posts: 3,108
Jims,
Why is bilstein shock setup so great? what makes it so much better then say the ground control koni setup or the same thing with KYB AGX? they are all around the same price.
Now how about say Tein HA, i know TEIN are not allowed in rule book, but my car is more for my personal enjoyment and attending local autox and lapping days rather then to compete to for the national championship.
-thanks
Jason
Why is bilstein shock setup so great? what makes it so much better then say the ground control koni setup or the same thing with KYB AGX? they are all around the same price.
Now how about say Tein HA, i know TEIN are not allowed in rule book, but my car is more for my personal enjoyment and attending local autox and lapping days rather then to compete to for the national championship.
-thanks
Jason
Thread Starter
Senior Member
Joined: Nov 2002
Posts: 3,108
ok been doing more and more research on the bilsteins.
the front are P30-0032, which are not height adjustable, hence the sleeves mazdaspeed motorsports offers.
The rears are apprantly height adjustable, but i'm not sure which model number exactly.
the fronts are off a 79-92 VW Cabriolet (Convertible), the rears for this car are B46-0657.
I can't find any info on how much adjustablility there is, and what size springs you will need. I'm guessing it will use the eibach ERS 2.5 inch springs, but i'm also not sure how stiff a spring the shocks can damp.
the bilstein site offers next to no info on shock models.
spoke to some ITS people at improvedtouring.com, and they said there is no real difference going with bilsteins, HYB, Tokkico, KONI, it just depends on what is more convienient with you.
Been reading more and more on the japanese coilovers. such as Tein HA, http://www.rxecret7.com/ offers them for 1050, does not include camber plates or pillow mounts.
the front are P30-0032, which are not height adjustable, hence the sleeves mazdaspeed motorsports offers.
The rears are apprantly height adjustable, but i'm not sure which model number exactly.
the fronts are off a 79-92 VW Cabriolet (Convertible), the rears for this car are B46-0657.
I can't find any info on how much adjustablility there is, and what size springs you will need. I'm guessing it will use the eibach ERS 2.5 inch springs, but i'm also not sure how stiff a spring the shocks can damp.
the bilstein site offers next to no info on shock models.
spoke to some ITS people at improvedtouring.com, and they said there is no real difference going with bilsteins, HYB, Tokkico, KONI, it just depends on what is more convienient with you.
Been reading more and more on the japanese coilovers. such as Tein HA, http://www.rxecret7.com/ offers them for 1050, does not include camber plates or pillow mounts.
Senior Member
Joined: May 2002
Posts: 22,465
From: California
what that is is the generic bilstein strut put into a housing so that it will fit the fc. the cool thing about the bilsteins is that they are cheap (200each) and you can order them with your valving specs. we have some similar stuff lying around.
Thread Starter
Senior Member
Joined: Nov 2002
Posts: 3,108
Originally Posted by j9fd3s' date='Dec 3 2003, 03:37 PM
what that is is the generic bilstein strut put into a housing so that it will fit the fc. the cool thing about the bilsteins is that they are cheap (200each) and you can order them with your valving specs. we have some similar stuff lying around.
Damn it time to call up mazdaspeed again and ask more questions. If only i can get past the hold, it sucks when its long D from Canada
