To4b with 60 compressor a/r and 1.15 turbine with p-trim exhaust wheel and tang divided housing for fast spooling of turbo.
Rated at 400+ horsepower. Is this true? Worth a try? I found a brand new one for 350.00... |
350? Off ebay?
|
Yeah... Just wondering if the turbo is worth the power it's rated at, and if it will even make it.
|
1FastT2 put down 405rwhp at 15psi on a T04B 60-1....
http://rx7club.com/forum/showthread.php?s=...threadid=211330 |
i thought t04s was a 60-1
i think its too small for you, what are the specs? |
A T04B isn't the same as a T04E OR a T60-1.... A T04B will bolt to a stock TII manifold and a real t04E family turbo such as the T60-1 will not..... I have a T60-1 w/ .70 comp and 1.00 A/R and HKS makes a great manifold for it.
I also had a t04B and it was better than stock but not by much. I dyno'd 333rwhp @ 15psi which wasn't to bad. The 400hp they claim is measured at the crank which sounds about right......Its a nice simple upgrade with out getting carried away with custom exaust, FMIC, etc. which I ended up doing anyway Hope this helps Brad |
Originally Posted by whiplash' date='Aug 27 2003, 06:49 PM
A T04B isn't the same as a T04E OR a T60-1.... A T04B will bolt to a stock TII manifold and a real t04E family turbo such as the T60-1 will not..... I have a T60-1 w/ .70 comp and 1.00 A/R and HKS makes a great manifold for it.
I also had a t04B and it was better than stock but not by much. I dyno'd 333rwhp @ 15psi which wasn't to bad. The 400hp they claim is measured at the crank which sounds about right......Its a nice simple upgrade with out getting carried away with custom exaust, FMIC, etc. which I ended up doing anyway Hope this helps Brad I'll shovel out the cash... TO4R here I come. https://www.nopistons.com/forums/pub...IR#>/smile.png |
Originally Posted by whiplash' date='Aug 27 2003, 04:49 PM
A T04B isn't the same as a T04E OR a T60-1.... A T04B will bolt to a stock TII manifold and a real t04E family turbo such as the T60-1 will not..... I have a T60-1 w/ .70 comp and 1.00 A/R and HKS makes a great manifold for it.
I also had a t04B and it was better than stock but not by much. I dyno'd 333rwhp @ 15psi which wasn't to bad. The 400hp they claim is measured at the crank which sounds about right......Its a nice simple upgrade with out getting carried away with custom exaust, FMIC, etc. which I ended up doing anyway Hope this helps Brad |
Did nobody look at my post or that link....
405RWHP at 15psi.................................... |
Originally Posted by RotaryRocket219' date='Aug 27 2003, 08:19 PM
Did nobody look at my post or that link....
405RWHP at 15psi.................................... |
All times are GMT -5. The time now is 03:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands