To4b with 60 compressor a/r and 1.15 turbine with p-trim exhaust wheel and tang divided housing for fast spooling of turbo.
Rated at 400+ horsepower. Is this true? Worth a try? I found a brand new one for 350.00... |
350? Off ebay?
|
Yeah... Just wondering if the turbo is worth the power it's rated at, and if it will even make it.
|
1FastT2 put down 405rwhp at 15psi on a T04B 60-1....
http://rx7club.com/forum/showthread.php?s=...threadid=211330 |
i thought t04s was a 60-1
i think its too small for you, what are the specs? |
A T04B isn't the same as a T04E OR a T60-1.... A T04B will bolt to a stock TII manifold and a real t04E family turbo such as the T60-1 will not..... I have a T60-1 w/ .70 comp and 1.00 A/R and HKS makes a great manifold for it.
I also had a t04B and it was better than stock but not by much. I dyno'd 333rwhp @ 15psi which wasn't to bad. The 400hp they claim is measured at the crank which sounds about right......Its a nice simple upgrade with out getting carried away with custom exaust, FMIC, etc. which I ended up doing anyway Hope this helps Brad |
Originally Posted by whiplash' date='Aug 27 2003, 06:49 PM
A T04B isn't the same as a T04E OR a T60-1.... A T04B will bolt to a stock TII manifold and a real t04E family turbo such as the T60-1 will not..... I have a T60-1 w/ .70 comp and 1.00 A/R and HKS makes a great manifold for it.
I also had a t04B and it was better than stock but not by much. I dyno'd 333rwhp @ 15psi which wasn't to bad. The 400hp they claim is measured at the crank which sounds about right......Its a nice simple upgrade with out getting carried away with custom exaust, FMIC, etc. which I ended up doing anyway Hope this helps Brad I'll shovel out the cash... TO4R here I come. https://www.nopistons.com/forums/pub...IR#>/smile.png |
Originally Posted by whiplash' date='Aug 27 2003, 04:49 PM
A T04B isn't the same as a T04E OR a T60-1.... A T04B will bolt to a stock TII manifold and a real t04E family turbo such as the T60-1 will not..... I have a T60-1 w/ .70 comp and 1.00 A/R and HKS makes a great manifold for it.
I also had a t04B and it was better than stock but not by much. I dyno'd 333rwhp @ 15psi which wasn't to bad. The 400hp they claim is measured at the crank which sounds about right......Its a nice simple upgrade with out getting carried away with custom exaust, FMIC, etc. which I ended up doing anyway Hope this helps Brad |
Did nobody look at my post or that link....
405RWHP at 15psi.................................... |
Originally Posted by RotaryRocket219' date='Aug 27 2003, 08:19 PM
Did nobody look at my post or that link....
405RWHP at 15psi.................................... |
I sure didnt think so...1FastT2 def. is not running the stock manifold. I called it the 60-1 b/c thats what he refered to it as. Read that thread though.
|
I know he doesnt have the stock manifold, but for a everyday preson who wanted more power could he/she just bolt this turbo onto a stock turbo 2 manifold.
|
It sounds crazy that you could..so I'm going to say no. I have NEVER heard anyone say that it could before, except for now. Were not talking about a hyrbid stock turbo with a T04 compressor or something.
|
Show us a pic. The 60-1 is actually a TO4B based turbo. Most other TO4B turbos are fairly small. I have a TO4B turbo with a AR 60 compressor, that has a smaller compressor wheel than a stock TII turbo. What are the spec's on the compressor wheel?
|
15 psi and 400~ rwhp...just get a t-04R and be done with it.
|
Originally Posted by jspecracer7' date='Aug 28 2003, 08:48 AM
15 psi and 400~ rwhp...just get a t-04R and be done with it.
RotaryRocket219 I did read the link you posted. And I thank you for sharing the information! I'm just looking for something to pound down a bit more... Those are awesome numbers though, don't get me wrong! Only reason I really inquired was the price. But I think I'll be happier just spending the money now... I used to be stuck on making power with the twins and having a "reliable" setup. I liked my car, but wasn't really where I wanted to be... https://www.nopistons.com/forums/pub...IR#>/smile.png |
A t04B isn't the same family as a T04E-T04S or T60-1. Now I don't know if a "B" will bolt to an HKS manifold, but thats not the issue here.
I'm telling you a "B" isn't the same family as a T60-1. Ask any turbo establishment. I had a Turbonetics T04B w/ Super V compressor wheel its basically a stock turbo with a larger cold/comp. side....The inlet is a 3" on it and bolts to the stock manifold.... A T60-1 bolts to an HKS (for instance) and sits about were the air pumps use to be...On my car anyway. Anyway, a T04B is a cheap way to get better hp and have a better more efficient running turbo. Your will have to run larger injectors and an ECU chip OR additional controller.... ON this setup I ran a 12.0 @ 116mph back in 97.... I sold the entire setup to a friend and he ran the same times...My T60-1 produces way for power...no contest! BUT you have to make and or FAB a few things to make it work and will cost alot more unless you can weld...which I did myself Brad |
Originally Posted by whiplash' date='Aug 29 2003, 07:16 AM
A t04B isn't the same family as a T04E-T04S or T60-1. Now I don't know if a "B" will bolt to an HKS manifold, but thats not the issue here.
I'm telling you a "B" isn't the same family as a T60-1. Ask any turbo establishment. I had a Turbonetics T04B w/ Super V compressor wheel its basically a stock turbo with a larger cold/comp. side....The inlet is a 3" on it and bolts to the stock manifold.... A T60-1 bolts to an HKS (for instance) and sits about were the air pumps use to be...On my car anyway. Anyway, a T04B is a cheap way to get better hp and have a better more efficient running turbo. Your will have to run larger injectors and an ECU chip OR additional controller.... ON this setup I ran a 12.0 @ 116mph back in 97.... I sold the entire setup to a friend and he ran the same times...My T60-1 produces way for power...no contest! BUT you have to make and or FAB a few things to make it work and will cost alot more unless you can weld...which I did myself Brad |
IGY, your the man, thank you.
-Marc |
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2429898579
Theres an example. Thats a TO4B turbo, that is NOT gonna bolt onto a stock manifold, it takes a TO4 manifold to run it. They make the "hyrbid" turbos that have different compressors, clipped wheels, etc. -Marc |
All times are GMT -5. The time now is 03:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands