My Blowzilla Has Arrived!
06-15-2004, 07:35 PM
#71
Senior Member
Join Date: Jan 2003
Location: London, Ontario
Posts: 2,871
Originally Posted by Dysfnctnl85' date='Jun 15 2004, 07:59 PM
...the RFL seems nice,
RFL sucks. Nobody needs to hear a BOV going off 3 times across the parking lot when you're pulling into a space.
06-15-2004, 07:49 PM
#72
Senior Member
Join Date: Jul 2002
Location: Fayetteville, Georgia
Posts: 2,483
Originally Posted by TYSON' date='Jun 15 2004, 08:35 PM
You'll be needing a thumb in the eye then, eh?
RFL sucks. Nobody needs to hear a BOV going off 3 times across the parking lot when you're pulling into a space.
RFL sucks. Nobody needs to hear a BOV going off 3 times across the parking lot when you're pulling into a space.
So let's hear the Tial.
06-16-2004, 07:14 AM
#76
Senior Member
Join Date: Nov 2002
Posts: 3,108
Originally Posted by ccarlisi' date='Jun 5 2004, 01:22 PM
All I need is a nice 120deg 3in bend. Surely someone here must know of where I can find one in the US for a reasonable price. I found a supplier in CDA http://www.members.shaw.ca/powertech/pipingbends.html, but would like to avoid doing the cross boarder thing if possible.
Go Canada!
06-16-2004, 08:26 AM
#77
Senior Member
Thread Starter
Join Date: Aug 2002
Posts: 502
Originally Posted by Cheers!' date='Jun 16 2004, 04:14 AM
Holly ****, canada owned the states on this one. I have never seen or heard of something only being in Canada and not in the states
Go Canada!
Go Canada!
Next, I need to order a 3" to 2.5" reducer to connect the bend to the turbo. My friend Mike, aka Zoomzoom, has tried a couple different reducers from Samco and ATPturbo. I was planning on ordering the ATP reducer because it is $17.95 vs 33.00 for the Samco piece, but according to Mike the fit is not very precise on the 3" side of the ATP piece. There was some space between the pipe and the ATP coupler that caused it wrinkly/bunch up when it was tightened down. Unfortunately, I then discovered that Samco does not have any 3-2.5" couplers in stock. According to the person I spoke with, they 'should' be getting some in about 3 weeks.
06-16-2004, 09:51 AM
#78
Senior Member
Join Date: Feb 2002
Location: Frederick MD
Posts: 6,331
Originally Posted by ccarlisi' date='Jun 16 2004, 07:26 AM
Yesterday I purchased a 120degree cast Greddy Bend from Ihor at Gotham Racing so my pipe-bend problems are history. 
Next, I need to order a 3" to 2.5" reducer to connect the bend to the turbo. My friend Mike, aka Zoomzoom, has tried a couple different reducers from Samco and ATPturbo. I was planning on ordering the ATP reducer because it is $17.95 vs 33.00 for the Samco piece, but according to Mike the fit is not very precise on the 3" side of the ATP piece. There was some space between the pipe and the ATP coupler that caused it wrinkly/bunch up when it was tightened down. Unfortunately, I then discovered that Samco does not have any 3-2.5" couplers in stock. According to the person I spoke with, they 'should' be getting some in about 3 weeks.
Next, I need to order a 3" to 2.5" reducer to connect the bend to the turbo. My friend Mike, aka Zoomzoom, has tried a couple different reducers from Samco and ATPturbo. I was planning on ordering the ATP reducer because it is $17.95 vs 33.00 for the Samco piece, but according to Mike the fit is not very precise on the 3" side of the ATP piece. There was some space between the pipe and the ATP coupler that caused it wrinkly/bunch up when it was tightened down. Unfortunately, I then discovered that Samco does not have any 3-2.5" couplers in stock. According to the person I spoke with, they 'should' be getting some in about 3 weeks.
