My Blowzilla Has Arrived!
Senior Member
Joined: Jan 2003
Posts: 2,871
From: London, Ontario
Originally Posted by Dysfnctnl85' date='Jun 15 2004, 07:59 PM
...the RFL seems nice,
RFL sucks. Nobody needs to hear a BOV going off 3 times across the parking lot when you're pulling into a space.
Senior Member
Joined: Jul 2002
Posts: 2,483
From: Fayetteville, Georgia
Originally Posted by TYSON' date='Jun 15 2004, 08:35 PM
You'll be needing a thumb in the eye then, eh?
RFL sucks. Nobody needs to hear a BOV going off 3 times across the parking lot when you're pulling into a space.
RFL sucks. Nobody needs to hear a BOV going off 3 times across the parking lot when you're pulling into a space.
So let's hear the Tial.
Senior Member
Joined: Nov 2002
Posts: 3,108
Originally Posted by ccarlisi' date='Jun 5 2004, 01:22 PM
All I need is a nice 120deg 3in bend. Surely someone here must know of where I can find one in the US for a reasonable price. I found a supplier in CDA http://www.members.shaw.ca/powertech/pipingbends.html, but would like to avoid doing the cross boarder thing if possible.
Go Canada!
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 502
Originally Posted by Cheers!' date='Jun 16 2004, 04:14 AM
Holly ****, canada owned the states on this one. I have never seen or heard of something only being in Canada and not in the states
Go Canada!
Go Canada!
Next, I need to order a 3" to 2.5" reducer to connect the bend to the turbo. My friend Mike, aka Zoomzoom, has tried a couple different reducers from Samco and ATPturbo. I was planning on ordering the ATP reducer because it is $17.95 vs 33.00 for the Samco piece, but according to Mike the fit is not very precise on the 3" side of the ATP piece. There was some space between the pipe and the ATP coupler that caused it wrinkly/bunch up when it was tightened down. Unfortunately, I then discovered that Samco does not have any 3-2.5" couplers in stock. According to the person I spoke with, they 'should' be getting some in about 3 weeks.
Senior Member
Joined: Feb 2002
Posts: 6,331
From: Frederick MD
Originally Posted by ccarlisi' date='Jun 16 2004, 07:26 AM
Yesterday I purchased a 120degree cast Greddy Bend from Ihor at Gotham Racing so my pipe-bend problems are history. 
Next, I need to order a 3" to 2.5" reducer to connect the bend to the turbo. My friend Mike, aka Zoomzoom, has tried a couple different reducers from Samco and ATPturbo. I was planning on ordering the ATP reducer because it is $17.95 vs 33.00 for the Samco piece, but according to Mike the fit is not very precise on the 3" side of the ATP piece. There was some space between the pipe and the ATP coupler that caused it wrinkly/bunch up when it was tightened down. Unfortunately, I then discovered that Samco does not have any 3-2.5" couplers in stock. According to the person I spoke with, they 'should' be getting some in about 3 weeks.
Next, I need to order a 3" to 2.5" reducer to connect the bend to the turbo. My friend Mike, aka Zoomzoom, has tried a couple different reducers from Samco and ATPturbo. I was planning on ordering the ATP reducer because it is $17.95 vs 33.00 for the Samco piece, but according to Mike the fit is not very precise on the 3" side of the ATP piece. There was some space between the pipe and the ATP coupler that caused it wrinkly/bunch up when it was tightened down. Unfortunately, I then discovered that Samco does not have any 3-2.5" couplers in stock. According to the person I spoke with, they 'should' be getting some in about 3 weeks.
Senior Member
Joined: Dec 2002
Posts: 389
From: VA
i ordered the same turbo but dee talked me in to the q-trim...lol..and dave i can't wait to see your finsihed project at the bbq..hopefully i should be finishing mine by then and getting tuned the week before!
