Hks To4r Install Manual
05-29-2005, 07:53 PM
#2
Senior Member
Join Date: Jun 2002
Location: La Plata, Maryland
Posts: 9,725
You should not really need it. Just follow the diagrams. I can't really see where you would run into any problems. If you find yourself unsure of something along the way just come back here and we can help you out.
What all are you putting on? Are you doing a new fuel system with the turbo? etc.
What all are you putting on? Are you doing a new fuel system with the turbo? etc.
05-30-2005, 02:19 AM
#3
Junior Member
Thread Starter
Join Date: May 2005
Posts: 4
i have put on 1680 secondry injectors and fuel rail, aeromotive fpr and walbro 255ltr hour fuel pump.
i also have a custom made front mount intercooler and knightsports rad fitted and the following
hks bov
power fc and datalogit
lm1 wideband reader
hks super dragger and decat pipe.
what im not sure of is what i can remove off the loom, i presume i can lose all the solonoids and just plug the holes on the plenium though.
regards
chris
i also have a custom made front mount intercooler and knightsports rad fitted and the following
hks bov
power fc and datalogit
lm1 wideband reader
hks super dragger and decat pipe.
what im not sure of is what i can remove off the loom, i presume i can lose all the solonoids and just plug the holes on the plenium though.
regards
chris
06-12-2005, 08:14 PM
#4
Senior Member
Join Date: Jun 2002
Location: La Plata, Maryland
Posts: 9,725
[quote name='chrislaw1968' date='May 29 2005, 11:19 PM']i have put on 1680 secondry injectors and fuel rail, aeromotive fpr and walbro 255ltr hour fuel pump.
i also have a custom made front mount intercooler and knightsports rad fitted and the following
hks bov
power fc and datalogit
lm1 wideband reader
hks super dragger and decat pipe.
what im not sure of is what i can remove off the loom, i presume i can lose all the solonoids and just plug the holes on the plenium though.
regards
chris
[/quote]
With a stand alone ECU you can cut whatever you like off the harness/loom.
i also have a custom made front mount intercooler and knightsports rad fitted and the following
hks bov
power fc and datalogit
lm1 wideband reader
hks super dragger and decat pipe.
what im not sure of is what i can remove off the loom, i presume i can lose all the solonoids and just plug the holes on the plenium though.
regards
chris
[snapback]718888[/snapback]
[/quote]
With a stand alone ECU you can cut whatever you like off the harness/loom.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)