hi



does anyone have the above in english as mine came in japanese, and i would rather be 100% sure on what im doing .



regards



chris https://www.nopistons.com/forums/pub...1047683358.gif

You should not really need it. Just follow the diagrams. I can't really see where you would run into any problems. If you find yourself unsure of something along the way just come back here and we can help you out.

What all are you putting on? Are you doing a new fuel system with the turbo? etc.

i have put on 1680 secondry injectors and fuel rail, aeromotive fpr and walbro 255ltr hour fuel pump.

i also have a custom made front mount intercooler and knightsports rad fitted and the following

hks bov

power fc and datalogit

lm1 wideband reader

hks super dragger and decat pipe.

what im not sure of is what i can remove off the loom, i presume i can lose all the solonoids and just plug the holes on the plenium though.



regards

chris

[quote name='chrislaw1968' date='May 29 2005, 11:19 PM']i have put on 1680 secondry injectors and fuel rail, aeromotive fpr and walbro 255ltr hour fuel pump.

i also have a custom made front mount intercooler and knightsports rad fitted and the following

hks bov

power fc and datalogit

lm1 wideband reader

hks super dragger and decat pipe.

what im not sure of is what i can remove off the loom, i presume i can lose all the solonoids and just plug the holes on the plenium though.



regards

chris


[/quote]





With a stand alone ECU you can cut whatever you like off the harness/loom.