custom wastegate springs
04-18-2006, 04:01 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2005
Posts: 5
The circumstances are too long to list in this thread.. The main point is that i need to make a custom wastegate spring, or find one for sale that will run around 3 pounds. ( I need to run a T04S04 on stock injectors). The wastegate is a trust 47mm. Just wondering if anyone has seen small springs for this size wastegate, or anyone has successfully run a custom made spring before.
04-19-2006, 12:28 PM
#3
Junior Member
Thread Starter
Join Date: Jun 2005
Posts: 5
Originally Posted by j9fd3s' post='814658' date='Apr 18 2006, 01:56 PM
i bet even if you left it open all the time it would still do over 3psi.
stock ecu or aftermarket? if its not a stock ecu, i bet you could run 8-10psi
Well I can't leave it open all the time (noise issues). I have a power fc, but 8-10 psi is no where near possible with stock injectors....Just wondering if anyone has had success making a custom spring before.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)