Ported 93 Fd Engine To Cosmo Engine Specs
06-14-2003, 05:32 AM
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
I ported a 93FD engine to the Cosmos engine specs. Basically I made the FD ports just as large as the J-spec cosmos ports. Side by side you can't tell them apart. This way if your using the cosmos lower intake manifold it will match the FD engines ports. I personally like the FD plates, they are reinforced better then the Cosmos plates. If People want to install a cosmo engine in their FD but dont want the motor mount problem with the original cosmo plates, they could use this other way(FD engine ported to cosmo specs.) I'll take pics soon. Vosko was at the shop but was so excited about his linelock system and trying it outside the shop that he forgot to take pics of the FD ported plates.
06-15-2003, 07:22 AM
#9
Senior Member
Join Date: May 2003
Location: Dover DE
Posts: 989
Originally Posted by Judge Ito' date='Jun 14 2003, 02:32 AM
Basically I made the FD ports just as large as the J-spec cosmos ports... This way if your using the cosmos lower intake manifold it will match the FD engines ports.
06-15-2003, 07:11 PM
#10
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
Originally Posted by TheCamel' date='Jun 15 2003, 12:22 PM
What I was asking is if you can port the FD's lower manifold to match the new cosmo ports, I don't know why I had housing on the brain.