I ported a 93FD engine to the Cosmos engine specs. Basically I made the FD ports just as large as the J-spec cosmos ports. Side by side you can't tell them apart. This way if your using the cosmos lower intake manifold it will match the FD engines ports. I personally like the FD plates, they are reinforced better then the Cosmos plates. If People want to install a cosmo engine in their FD but dont want the motor mount problem with the original cosmo plates, they could use this other way(FD engine ported to cosmo specs.) I'll take pics soon. Vosko was at the shop but was so excited about his linelock system and trying it outside the shop that he forgot to take pics of the FD ported plates.
|
Judge, what about port matching the FD lower housing to the new port?
|
yeah i really did totally forget. if its there the next time i come. i'll take pictures
|
cool
|
please post the pics soon jon!
|
sweet judge! cosmo = cool
mike |
Originally Posted by TheCamel' date='Jun 14 2003, 10:45 AM
Judge, what about port matching the FD lower housing to the new port?
|
Originally Posted by Judge Ito' date='Jun 14 2003, 02:42 PM
I'm not understanding your question. Ask me again..
mike |
Originally Posted by Judge Ito' date='Jun 14 2003, 02:32 AM
Basically I made the FD ports just as large as the J-spec cosmos ports... This way if your using the cosmos lower intake manifold it will match the FD engines ports.
|
Originally Posted by TheCamel' date='Jun 15 2003, 12:22 PM
What I was asking is if you can port the FD's lower manifold to match the new cosmo ports, I don't know why I had housing on the brain.
|
All times are GMT -5. The time now is 12:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands